TP series
1Pages

High Voltage Power Supplies TP Series for APD Features • Compact size, PCB mountable • Low ripple, < 10mVp-p • Output voltage controlled by remote control voltage • Output short circuit protected • Low cost Summary TP Series are high voltage DC-DC converters ideally suited for biassing Avalanche Photodiodes(APDs) and Photodetectors. They feature exceptionally low ripple and noise, remote voltage control and output short circuit protection. Over current, output short circuit -10°C to +50°C -20°C to +60°C 20 to 80%RH(no condensation) 30g Approx Dimensions inch(mm) Input Voltage(Vcc) +5Vdc ± 5% Output Control Remote control voltage(Vcon-in) 0 to 3Vdc(Input impedance : 10k) Regulation Line : 0.3% of max voltage for Vin ± 5% Load : 2% typ of max voltage for load change of 10% 0.08%/°C typ Temp. Coef. Voltage setting -1%, +3% for Vcon-in at max output accuracy Protection Operating temp. Storage temp. Humidity Weight Input current *PIN and are internally connected. *Recommend to use Rp for protection, and C for high speed application. Rp = 100k, C = 1nF is typical Rated load O tp t oltage Output voltage Warranty We warrant that products contained in this catalog (hereinafter, the “Products”) are free from defects in material and workmanship under normal use for a period of one (1) year from the date of shipment thereof. However, the warranty period for X-ray detectors and X-ray source shall be either one (1) year from the date of shipment or 1,000 hours, whichever shorter.The above warranty shall not apply to any Product which, at our sole judgment, has been:i)Repaired or altered by persons unauthorized by us; or ii)Connected, installed, adjusted or used otherwise than in accordance with the instructions furnished by us (including being used in an inappropriate installation environment, such as in corrosive gas, high temperature and humidity). We are not liable for any loss, damage or failure of the Products after the shipment thereof caused by external factors such as disasters.If any Product is showed to be defective as satisfactory to us, we, at our sole discretion, repair or replace such defective Products at no cost to the purchaser.We assume no liability to the purchaser or any third party for special, incidental, consequential, or other damages resulting from a breach of the foregoing warranty. This warranty excludes any and all other warranties not set forth herein, express or implied, including without limitation the implied warranties of merchantability or fitness for a particular purpose. The Products are not designed and produced for such applications as requiring extremely high reliability and safety, or involving human lives (such as nuclear power, aerospace, social infrastructure facility, medical equipment, etc.). The use under such environment is not covered by this warranty and may require additional design and manufacturing processes. Regarding RoHS compliance, Matsusada Precision Inc. does not intentionally use objectionable substances in the products listed within this catalog. Matsusada Precision Inc. manufactures products using components which, according to our suppliers, are “RoHS compliant parts”. However, Matsusada Precision does not analyze each and every unit to confirm. Therefore, there may be some customized products which do not comply to RoHS. Please contact your nearby sales office for confirmation. San Jose Office : 2570 N.First Street Suite 200 San Jose, CA 95131 Dallas Office : 5430 LBJ Freeway, Suite 1200 Dallas, TX 75240 International Office : Osaka-City, Osaka Japan Tel: +81-6-6150-5088 Fax: +81-6-6150-5089 Tel: +1-408-273-4573 Fax: +1-408-273-4673 Tel: +1-972-663-9336 Fax: +1-972-663-9337 New York Office : 80 Orville Drive Suite 100 Bohemia, NY 11716 Boston Office : 859 Willard St. One Adams Place, Suite 418 Quincy, MA 02169 Headquarters : 745 Aoji-cho Kusatsu Shiga 525-0041 Japan Tel: +1-631-244-1407 Fax: +1-631-244-1496 Tel: +81-77-561-2111 Fax: +81-77-561-2112 Tel: +1-617-663-5711 Fax: +1-617-663-5331