TF series
1Pages

{{requestButtons}}

Catalog excerpts

TF series - 1

Miniature HV Power Supplies TF Series FEATURES • Ultra-compact, PCB mountable • Low ripple, 30mVp-p • Low Noise due to metal shielding • Well-regulated, high performance • External potentiometer or external control voltage programming • Arc and continuous short circuit protection SUMMARY TF Series are miniaturized, well regulated high voltage power supplies suitable for photomultiplier. They feature exceptionally low noise, external potentiometer or voltage control and fully protection against arc and continuous output short circuit. Output voltage (kVdc) 0 to 1.25 0 to 1.25 Model Positive polar output TF-1.25P-12 TF-1.25P-15 Negative polar output TF-1.25N-12 TF-1.25N-15 Output voltage range for this output current is 50% to 100% of maximum output voltage. Output current must be derated linearly when operating at levels below 50% of the output voltage capability. Input voltage/current (TF-1.25P-12,TF-1.25N-12) +12Vdc ±1Vdc, 95mA Typ (TF-1.25P-15,TF-1.25N-15) +15Vdc ±1Vdc, 90mA Typ Output control By external 50k potentiometer or external control voltage(Vcon-in) 0 to 5Vdc(Input impedance 80k) Regulation Line : ±0.01% of max voltage for Vin ±1V Load : 0.01% of max voltage for full load change Stability 0.02%/Hr Setting voltage accuracy ±0.5%(at maximum output Vcon-in) Temperature coefficient 0.007%/°C Protection Reversible input connection Overload, arc and continuous output short circuit Temperature range Operating : -10°C to +50°C Storage : -25°C to +85°C Weight 30g approx (BOTTOM VIEW) Note : • Specifications are at the maximum rated output after ½Hr warm-up. • Specifications are subject to change without notice. CHARACTERISTICS OF OUTPUT VOLTAGE SETTING 1. PIN , and case are internally connected. 2. CASE PIN should be always connected to ground. 3. Input impedance of Pin is greater than 80k 4. External potentiometer of T.C 100ppm/°C, PC ¼W is recommended. San Jose Office : 2570 N.First Street Suite 200 San Jose, CA 95131 Dallas Office : 5430 LBJ Freeway, Suite 1200 Dallas, TX 75240 International Office : Kyoto-City, Kyoto Japan Tel: +81-75-229-6355 Fax: +81-75-229-6366 Tel: +1-408-273-4573 Fax: +1-408-273-4673 Tel: +1-972-663-9336 Fax: +1-972-663-9337 New York Office : 80 Orville Drive Suite 100 Bohemia, NY 11716 Headquarters : 745 Aoji-cho Kusatsu Shiga 525-0041 Japan Tel: +1-631-244-1407 Fax: +1-631-244-1496 Tel: +81-77-561-2111 Fax: +81-77-561-2113

Open the catalog to page 1

All Matsusada catalogs and technical brochures

  1. W series

    3 Pages

  2. RC series

    2 Pages

  3. TP series

    1 Pages

  4. TZ series

    2 Pages

  5. TG series

    2 Pages

  6. PZJ series

    2 Pages

  7. XWR series

    2 Pages

  8. X series

    1 Pages

  9. XR series

    1 Pages

  10. Xg Series

    4 Pages

  11. AMP series

    4 Pages

  12. DRA series

    5 Pages

  13. DOS series

    8 Pages

  14. VOL Series

    12 Pages

  15. ECA series

    2 Pages

  16. KA-R series

    3 Pages

  17. EJC series

    2 Pages

  18. TA/TC Series

    2 Pages