*mydirectindustry

RC series

Product catalog summary

Features Summary:
The Max 250W is a compact, high-power, high-voltage power supply designed for integration. It offers consistent low noise and high stability, even as a high-power model. The unit can be controlled via an external potentiometer or external voltage. The RC series is characterized by low ripple and high performance, capable of outputting 250W, making it suitable for equipment with limited space. Applications include capacitor charge and discharge, electron beam, and withstand voltage tests, benefiting from its high power, high voltage, and low noise.

Lineup:
The RC Series offers high power and low noise HV power supplies with various models providing different output voltages, currents, and powers. Models range from RC125-0.3* to RC125-30*, with input currents of 6.2A to 12.4A and ripple values under 1.0 Vp-p.

Specifications:
The power supply operates at +24V±10% and can be controlled by an external potentiometer (5kΩ) or control voltage (0 to +5Vdc). It features a setting voltage accuracy of ±2%, line regulation of 0.015%/V, and load regulation of 0.01%. Stability is maintained at 0.01%/Hr with a temperature coefficient of 50ppm/˚C. Protections include overload, arc, and continuous output short circuit. Operating temperature ranges from 0˚C to +60˚C, with storage temperatures from -20˚C to +60˚C and humidity levels of 20% to 80% RH.

Connection Diagram:
The connection diagram specifies grounding requirements and input impedance details. It includes recommendations for potentiometer specifications and wire gauges for different pins.

Dimensions:
The dimensions for various models are provided, with measurements in inches and millimeters, detailing the size of the heat sink, rivet, and output voltage ranges.

Warranty:
The products are warranted to be free from defects in material and workmanship under normal use for one year from the date of shipment. The warranty excludes products repaired or altered by unauthorized persons or used contrary to instructions. It does not cover applications requiring extremely high reliability and safety, such as nuclear power or medical equipment.

Catalog excerpts

High power / Low noise HV power supply 01.166.01 18-1 FEATURES • Max 250W is a compact high power high voltage power supply for integration. • Consistent low noise with high stability even though it is the high power model. • You are able to control unit via external potentiometer or external voltage. SUMMARY RC series is a low ripple high performance high voltage power supply which is able to output 250W. Ultra high power supplies to be able to use in equipment with very limited space. These high voltage power supplies are suitable for following applications, such as capacitor charge and discharge, electron beam, withstand voltage test taking advantage of high power, high voltage, and low noise. * P : Positive polar output Input current N : Negative polar output SPECIFICATIONS Input current Output voltage control Setting voltage accuracy Line Regulation Load regulation Stability Temperature coef. Monitors Reference voltage Overshoot Protections +24V±10% By external potentiometer 5kΩ or external control voltage (Vcon-in) 0 to +5Vdc ±2%/Vcon-in = 5.00V 0.01% (at maximum voltage for ±10% input line change) 0.01% (at maximum voltage for 0 to 100% load change) 0.01%/Hr 50ppm/˚C +5V/rated output for both voltage / current 1kΩ output impedance ±2%(F.S) accuracy 5V±1% Line Reg. 0.015%/V up to 6kV models : < 1Vpeak More than 10kV models : < 0.1%Vpeak Overload, arc and continuous output short circuit Input terminal 2-pin connector (for input power), 8-pin connector (for input signal) Mating connector (with lead 250mm) is assorted. [Recommendation] Wire for pin 1 and 2 are AWG18, and wire for pin 3 to 8 are AWG22 to 18. Output terminal HV shield cable 0.5m Operating temp. 0˚C to +60˚C(Derating : +40˚C to +60˚C) [Derating] Storage temp. Humidity

Open the catalog to page 1

SIDE VIEW Heat sink Output voltage CONNECTION DISGRAM Input voltage 24V±10 *1 GND pin must be properly grounded *2 Return line from the load must be connected to GND or pin *3 Input impedance of Vcon-in pin is 100k *4 Potentiometer of T.C 100PPM/°C, PC 1/4W is recommended Warranty We warrant that products contained in this catalog (hereinafter, the “Products”) are free from defects in material and workmanship under normal use for a period of one (1) year from the date of shipment thereof. However, the warranty period for X-ray detectors and X-ray source shall be either one (1) year from the date...

Open the catalog to page 2