AMP series
4Pages

{{requestButtons}}

Catalog excerpts

AMP series - 1

Matsusada Prcision AMP series Ultra High Speed HV Amplifier Additional output ranges for solar battery panel valuations! Ultra Fast AMP series is an ultra high speed high voltage amplifier. It realized as fast as 700V/us even with load, and approximately 2 times faster than existing models. With the capability of peak current output of 3 times. it suppress the distortion of waveform when with capacitive load. | application 驕 Solar battery panel valuations Beam deflection 镕 Corona discharge Electrostatic chuck Օ Electrophotography process Breakdown voltage testing Օ Electroviscocity fluid Lighting discharge tube Օ Various electrostatic testing For measuring voltage and/or current | output range When the voltage at load is lower than the rated maximum output of AMP series, constant voltage and high speed operation is possible by sinking the output current with current sink feature. As example of solar battery application, cell/panel voltage and current data can be obtained by logging the change of current sink by changing the voltage to solar battery cell/panel gradually. At that time with its high slew rate of 300v/us AMP can get more detailed sampling. AMP is a bi-polar power supply with 0 crossing, and so, it can measure the output short current at 0V. Moreover, it can output peak current of 3 times more than rated current(at DC). (see right chart) lout (Example : AMP-10B10) -lout * Output rms must be within 10mA Suitable for the trend to higher voltage for cell/panel evaluation Voltage rating required for solar battery(panel) evaluation is getting higher and higher. AMP series added more lineups raging from ±400V to ±1200V to meet the demand for evaluation of higher voltage solar battery panel as well as evaluation of cell/panel with wider output range. High speed response of slew rate 700V/us * | voltage rise waveform_ *Change model to model Vcon-in A:32.0kV @ :16.0kV Slew rate with actual load is as high as 700v/us, and solve the problem of "When actual operation with load, the response become slow." Ideal for higher speed printer or material evaluation testing. Vout :38.0ms @ :50.0ms Ch1 Freq 1.250kHz Ch2 Ampl 40.68kV 32kV -A Example of waveform: model AMP-20B20 Operation condition: Vcon-in=±10V Vout=±20kV Rl=1MQ F=1.25kHz Slew rate: SR=32kV/40us > 700V/us --40ms M!I1 20 0V II I I M | 100ms AICh1/ 0.0V1 I 10.26%~l

Open the catalog to page 1
AMP series - 2

■ AMP sries ±10KV, ±20KV / 100W, 400W ±400V to ±1200V / 800W, 1200W | LINEUP Output Voltage Frequency Response uc and Full Scale -1 SB be|ow ac 10Hz square waveform -400V to +400Vdc ±2000mAmax or ±2000mApk 2000mArms max and 4000mApk 1mS max AMP-0.4B2000 300V/ps DC to 40kHz DC to 60kHz -600V to +600Vdc ±2000mAmax or ±2000mApk 2000mArms max and 4000mApk 1mS max AMP-0.6B2000 DC to 40kHz DC to 60kHz -800V to +800Vdc ±1500mAmax or ±1500mApk 1500mArms max and 3000mApk 1mS max AMP-0.8B1500 DC to 40kHz DC to 60kHz -1000V to +1000Vdc ±1200mAmax or ±1200mApk 1200mArms max and 2400mApk 1mS max...

Open the catalog to page 2
AMP series - 3

AMP sries ±10KV, ±20KV / 100W, 400W ±400V to ±1200V / 800W, 1200W | DIMENSIONS inch(mm) 17.14(435.4) cd POWER ON/OFF switch © HV ON/OFF switch Have priority to all other oprations for safety reason. To be also used to reset output cutoff status due to output over load, output short circuit protection or black out protection. Remote switch operation is possible only when output switch is on. BNC receptacle ® OUTPUT voltage meter © External control voltage (Vcon-in)input connector © Bias ON/OFF switch © Bias setting dial ® OUTPUT current monitor terminal © OUTPUT voltage monitor terminal ©...

Open the catalog to page 3
AMP series - 4

| option -LC Current limit Limit the current with voltage drop down. -LN Cancellation of blackout protection -L(230V) Input Voltage AC230V ±10% single phase (AMP-10B10) *When ordering, suffix L mark(option mark) to the model number. <e.g.> AMP-10B10-LCN(230V) (Alphabetical and input voltage order.) | input / output cable Input cable AMP-10B10 ■► CABLE TYPE1 AMP-10B10 with -L(230V) option, other models ■► CABLE TYPE3 Length is 2.5m for both.(see CABLE series catalog for details) Output cable AMP-10B10, AMP-10B40 CN-40-AHVP AMP-20B20 CN-40-AHVP(TU)* Other models ■4 CN-20-AHVP Length is 1.5m...

Open the catalog to page 4

All Matsusada catalogs and technical brochures

  1. W series

    3 Pages

  2. RC series

    2 Pages

  3. TP series

    1 Pages

  4. TZ series

    2 Pages

  5. TG series

    2 Pages

  6. TF series

    1 Pages

  7. PZJ series

    2 Pages

  8. XWR series

    2 Pages

  9. X series

    1 Pages

  10. XR series

    1 Pages

  11. Xg Series

    4 Pages

  12. DRA series

    5 Pages

  13. DOS series

    8 Pages

  14. VOL Series

    12 Pages

  15. ECA series

    2 Pages

  16. KA-R series

    3 Pages

  17. EJC series

    2 Pages

  18. TA/TC Series

    2 Pages