MS-MBC-4-H2-12

1 / 2 PagesView full catalog

MS-MBC-4-H2-12

Product catalog summary

Technical Specifications

Frequency Range: 1695 - 2690 MHz
Gain: 20.0 dBi
VSWR: <1.5:1
Polarization: Dual Slant ±45°
Front to Back Ratio: >28dB
Intermodulation: <-153dBc
Connector Type: 8 x 4.3-10 female
Number of Ports: 8 total, 2 per beam
RET: 2° to 15°
Horizontal Beamwidth: 18° (3dB level), 30° (10dB level)
Vertical Beamwidth: 12.5° (3dB)
Beam Cross-over: 10dB typical
Horizontal Coverage: 120°
Total Number of Beams: 4
First Upper Sidelobe Level: < -15dB
Azimuth Sidelobe Level: < -15dB
Isolation Port to Port - Polarization: 28dB
Isolation Port to Port - Beam: 25dB
Power Rating: 200W per port
Impedance: 50 ohm

Mechanical Data

Dimensions (H x W x D): 680 x 547 x 571 mm (26.8 x 21.5 x 22.5 inch)
Antenna Weight: 25.4 kg (56 lbs)
Radome Material: Fiber Glass

Environmental Ratings

Mounting: 2 position pipe mount, compatible pipe diameter: 6.1 – 11.4 cm (2.4 – 4.5 inch)
Humidity: 95% RH @ +30°C
Temperature Range: -40°C to +70°C
Wind Load @ 150km/h: Frontal: 284/63.8, Lateral: 340/76.4, Rear: 355/79.8

Pattern Results

Multi-Beam Cylindrical Base-Station Lens Antenna with four isolated high frequency cross-polarized beams.
Each beam supports 2x2 MIMO with RET (Smart Bias Tee & AISG 2.0) adjustable from 2° to 15°.

Catalog excerpts

MATSING LENS TECHNOLOGY ENABLED ation Lens Antenna; 1695-2690 MHz) cross-polarizei rts to support 2x2 MIMO. RET ith 2-15° for each beam. Multi-Beam Cylindrical Base-Four isolated high frequency beams. Each beam has two po (Smart Bias Tee & AISG 2.0) wi PATTERN RESULTS: High-Band Horizont Vertical pattern at 2° tilt and 15° tilt (1.80GHz) AIL: | [email protected] WEBSITEjwww.matsing.com PHONE: [(949)585-5144

Open the catalog to page 1

MECHANICAL DATA Horizontal Coverage Horizontal Beamwidth (3dB level) Horizontal Beamwidth (10dB level) Antenna Weight Radome Material Fiber Glass 2 position pipe mount Compatible pipe diameter: 6.1 – 11.4 cm 2.4 – 4.5 inch ENVIRONMENTAL RATINGS Beam Cross-over Total Number of Beams Number of Ports per Beam Number of Ports Total First Upper Sidelobe level Azimuth Sidelobe level Front to Back Ratio Isolation Port to Port - Polarization Isolation Port to Port - Beam Humidity Temperature CONNECTOR LAYOUT: Power Rating Connector Quantity and Type EMAIL: [email protected] WEBSITE: www.matsing.com PHONE:...

Open the catalog to page 2

MS-MBC-4-H2-12

MS-MBC-4-H2-12

Catalog excerpts

All Matsing inc. catalogs and technical brochures