MS-MBA-4.4.2-F4-H2-L2

Product catalog summary

Overview: The document provides technical specifications for a multi-beam tri-band base-station antenna utilizing a patented spherical lens design. It supports F-Band, High-Band, and Low-Band frequencies with cross-polarized beams and MIMO capabilities.

Specifications:

F-Band: Frequency range 3300-4200 MHz, Gain 17dBi, VSWR <1.5:1, Dual Slant ±45° polarization, 4 beams with 4 ports each for 4x4 MIMO, RET 0°-20°.
High-Band: Frequency range 1695-2690 MHz, Gain 19dBi, VSWR <1.5:1, Dual Slant ±45° polarization, 4 beams with 2 ports each for 2x2 MIMO, RET 0°-20°.
Low-Band: Frequency range 698-960 MHz, Gain 13.5dBi, VSWR <1.5:1, Dual Slant ±45° polarization, 2 beams with 2 ports each for 2x2 MIMO, RET 0°-40°.

Mechanical Data:

Dimensions: 163.5 x 61.7 x 72.1 cm (64.4 x 24.3 x 28.4 inch)
Weight: 51 kg (112.4 lbs)
Radome Material: Fiber Glass

Environmental Ratings:

Humidity: 95% RH @ +30°C
Temperature: -40°C to +70°C
Wind Load: Frontal 686N/154.2lbf, Lateral 930N/209.1lbf at 150km/hr

Mounting: Standard pipe mount compatible with pipe diameter 6.1 – 11.4 cm (2.4 – 4.5 inch).

Performance:

Front to Back Ratio: >28dB
Isolation Port to Port: >28dB
Intermodulation: <-153dBc
Power Rating: 150W per port
Impedance: 50 ohm

Connector Layout: 16 x 4.3-10 female connectors for F-Band, 8 for High-Band, and 4 for Low-Band.

Contact Information: Email: [email protected], Website: www.matsing.com, Phone: (949)585-5144

Catalog excerpts

MS-MBA-4.4.2-F4-H2-L2 Lens Technology EnabledTM Multi-Beam Tri Band Base-Station Antenna utilizes a patented spherical lens design with 4 isolated F Band (3300MHz – 4200MHz) cross-polarized beams, 4 isolated High Band (1695MHz – 2690MHz) cross-polarized beams and 2 isolated Low Band (698 MHz – 960 MHz ) beams . Each F-Band beam has 4 ports per beam to support 4x4 MIMO . Each H & L-Band beam has 2 ports to support 2x2 MIMO . RET for F Band & High Band Beams 0°-20°. RET for Low Band Beams 0°-40° PATTERN RESULTS: F-Band Horizontal Pattern (3.6GHz) F-Band Vertical pattern (3.6GHz) at tilt 0° and 20° High-Band Horizontal Pattern (1.92GHz) High-band Vertical Pattern (1.92GHz) at tilt 0° and 20° Low-Band Horizontal Pattern (0.8GHz) Low-band Vertical Pattern (0.8GHz) at tilt 0° and 40° EMAIL: [email protected] WEBSITE: www.matsing.com PHONE:

Open the catalog to page 1

MATSING LENS TECHNOLOGY ENABLED MECHANICAL DATA TECHNICAL SPECIFICATIONS PER BEAM Frequency 3300-4200 MHz 1695-2690 MHz 698-960 MHz Standard pipe mount Mounting Compatible pipe diameter: Beam Cross-over CONNECTOR LAYOUT: [email protected] WEBSITE: |www.matsing.com (949)585-5144

Open the catalog to page 2

MS-MBA-4.4.2-F4-H2-L2

MS-MBA-4.4.2-F4-H2-L2

Catalog excerpts

All Matsing inc. catalogs and technical brochures