MS-MBA-4-C8A3

MS-MBA-4-C8A3

MS-MBA-4-C8A3

Product catalog summary
Overview: The document describes a multi-beam base-station antenna designed for multi-sector cell site deployments. It features a patented spherical lens design with four isolated C-Band cross-polarized beams, each supporting 8x8 MIMO and RET from 0° to 15°.
Technical Specifications:
  • Frequency Range: 3700 – 4200 MHz
  • Gain: 22dBi
  • VSWR: Less than 1.5:1
  • Polarization: Dual Slant ±45°
  • Beam Cross-over: 8dB typical
  • Front to Back Ratio: 28dB
  • Isolation Port to Port - Beam: 28dB
  • Intermodulation: Less than -153dBc
  • Connector Quantity and Type: 32 x 4.3-10 female
  • Number of Ports per Beam: 8
  • Horizontal Beamwidth (10dB level): 34°
  • Horizontal Beamwidth (3dB level): 19°
  • Vertical Beamwidth (3dB level): 6.5°
  • Horizontal Coverage: 120°
  • Total Number of Beams: 4
  • Total Number of Ports: 32
  • Upper Side Lobe Suppression: 16dB
  • Azimuth Sidelobe Level: -18dB
  • Isolation Port to Port - Polarization: 28dB
  • Power Rating: 150W per port
  • Impedance: 50 ohm
Mechanical Data:
  • Dimensions (H x W x D): 153 x 70.3 x 52.8 cm (60.1 x 27.7 x 20.8 inch)
  • Antenna Weight: 55 kg (121.2 lbs)
  • Radome Material: Fiber Glass
Environmental Ratings:
  • Humidity: 95% RH at +30°C
  • Temperature Range: -40°C to +70°C
Mounting: Standard pipe mount compatible with pipe diameters of 6.1 – 11.4 cm (2.4 – 4.5 inch).
Wind Load: At 150 km/hr, frontal load is 800.4 N/Ibf and lateral load is 462.5 N/Ibf.
Contact Information: Email: [email protected], Website: www.matsing.com, Phone: (949) 585-5144
See more

Catalog excerpts

MS-MBA-4-C8A3-1

LENS TECHNOLOGY ENABLED Lens Technology Enabled™ Multi-Beam Base-Station Antenna perfect for multi-sector cell site deployments, utilizes a patented spherical lens design with 4 isolated C-Band (3700—4200MHz) cross-polarized beams. Each Beam has 8 ports or 8x8 MIMO. RET available from 0° - 15°. PATTERN RESULTS:

 Open the catalog to page 1
MS-MBA-4-C8A3-2

LENS TECHNOLOGY ENABLED MS-MBA-4-C8A3 TECHNICAL SPECIFICATIONS Number of Ports Total MECHANICAL DATA Standard pipe mount Mounting Compatible pipe diameter: Wind Load @150 km/hr Fronta|: 800.4/ 179.9 CONNECTOR LAYOUT: Upper Side Lobe Suppression Azimuth Sidelobe Level Front to Back Ratio Isolation Port to Port - Polarization Isolation Port to Port - Beam Power Rating Connector Quantity and Type

 Open the catalog to page 2

All Matsing inc. catalogs and technical brochures

  1. MS-MBA-4-B4

    2  Pages

  2. MS-MBA-4-C8A3

    2  Pages

  3. MS-MBA-3-H8A2

    2  Pages

  4. MS-MBA-3-H4

    2  Pages

  5. MS-MBA-3-F4

    2  Pages

  6. MS-MBA-2-L2

    2  Pages

  7. MS-MBA-2-T2

    2  Pages

  8. MS-MBA-3-T4A2

    2  Pages

  9. MS-MBA-3-C4A3

    2  Pages

  10. MS-MBA-3-F2

    2  Pages

  11. MS-MBC-4-C4-6

    2  Pages

  12. MS-4F30

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.