MS-MBA-3-H8A2

MS-MBA-3-H8A2

MS-MBA-3-H8A2

Product catalog summary
Product Overview:
The MS-MBA-3-H8A2 is a Lens Technology Enabled™ Multi-Beam Spherical Array Base-Station Antenna designed for high-frequency applications ranging from 1695 to 2690 MHz. It features three dual-polarized beams, each supporting 8x8 MIMO with independent Remote Electrical Tilt (RET) from 0° to 15°.
Technical Specifications:
  • Frequency Range: 1695-2690 MHz
  • Gain: 18.5 dBi
  • VSWR: <1.5:1
  • Polarization: Dual Slant ±45°
  • Beam Cross-over: 10 dB typical
  • Front to Back Ratio: >28 dB
  • Isolation Port to Port - Beam: >26 dB
  • Intermodulation: <-153 dBc
  • Connector Type: 24 x 4.3-10 female
  • Number of Ports per Beam: 8
  • Horizontal Beamwidth: 40° (10 dB level), 23° (3 dB level)
  • Vertical Beamwidth: 20° (10 dB level), 12° (3 dB level)
  • Horizontal Coverage: 120°
  • Total Number of Beams: 3
  • Power Rating: 200W per port
  • Impedance: 50 ohm
Mechanical Data:
  • Dimensions (H x W x D): 241.8 x 61.7 x 68.3 cm (95.2 x 24.3 x 26.9 inch)
  • Antenna Weight: 82.0 kg (181.0 lbs)
  • Radome Material: Fiber Glass
Environmental Ratings:
  • Humidity: 95% RH @ +30°C
  • Temperature Range: -40°C to +70°C
  • Wind Load @ 150 km/h: Frontal: 1046 N/lbf, Lateral: 1331 N/lbf, Rear: 1227 N/lbf
Mounting:
  • Mount Type: 2 position pipe mount
  • Compatible Pipe Diameter: 6.1 – 11.4 cm (2.4 – 4.5 inch)
Contact Information:
Email: [email protected]
Website: www.matsing.com
Phone: (949) 585-5144
See more

Catalog excerpts

MS-MBA-3-H8A2-1

MATSING LENS TECHNOLOGY ENABLED Lens Technology Enabled™ Multi-Beam Spherical Array Base-Station Antenna; 3 High-frequency (1695 - 2690MHz) dual-polarized beams. Each beam has 8 port to support 8x8 MIMO. Independent RET available for each beam from 0°-15°. PATTERN RESULTS: Horizontal Pattern (1.80GHz) Vertical Pattern at tilt 0°-15° (1.80GHz) AIL: | [email protected] WEBSITE: |www.matsing.com (949)585-5144

 Open the catalog to page 1
MS-MBA-3-H8A2-2

MATSING LENS TECHNOLOGY ENABLED MECHANICAL DATA TECHNICAL SPECIFICATIONS CONNECTOR LAYOUT:

 Open the catalog to page 2

All Matsing inc. catalogs and technical brochures

  1. MS-MBA-4-C8A3

    2  Pages

  2. MS-MBA-4-B4

    2  Pages

  3. MS-MBA-4-C8A3

    2  Pages

  4. MS-MBA-3-H4

    2  Pages

  5. MS-MBA-3-F4

    2  Pages

  6. MS-MBA-2-L2

    2  Pages

  7. MS-MBA-2-T2

    2  Pages

  8. MS-MBA-3-T4A2

    2  Pages

  9. MS-MBA-3-C4A3

    2  Pages

  10. MS-MBA-3-F2

    2  Pages

  11. MS-MBC-4-C4-6

    2  Pages

  12. MS-4F30

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.