Matrox® Display Wall Mura™ IPX Series • LUMA Pro Series™ System Builder’s Guide

Matrox Display Wall – System Builder’s

Product overview Mura IPX Series products are PCIe ×8 Gen 2.0 cards that provide high-density capture, encode, and decode functionality to enhance video walls and operator workstations with advanced video processing and networking capabilities. Hardware summary – Mura IPX Series The Matrox Mura IPX Decode and IPX Encode/Decode Series of products include the following key features:  Multi-channel 4K/HD/SD encode and decode over standard IP DisplayPort™, SDI, and HDMI® capture, IP encode, and IP decode support on a single card Flexible stream and record capabilities anywhere on the network Separate...

Form factor Input support Decode support Encode support Part number Card type Memory Output support Power consumption Weight Dimensions Regulatory compliance Matrox Display Wall – System Builder’s Guide

Form factor Input support Decode support Encode support Part number Card type Memory Output support Power consumption Weight Dimensions Regulatory compliance Matrox Display Wall – System B

Form factor 4x Mini HDMI (Type C), 1x 100/1000 Base-T RJ45 Ethernet Port 4x Mini HDMI (Type C), 1x 100/1000 Base-T RJ45 Ethernet Port Decode support Encode support Part number Card type Memory Output support Input support Power consumption Weight Dimensions Regulatory compliance Matrox Display Wall – System Builder’s Guide L: 9.02 in / W: 0.75 in / H: 4.38 in L: 22.91 cm / W: 1.91 cm / H: 11.13 cm Class B: FCC, CE, RCM, VCCI, ICES

Form factor 4x Mini HDMI (Type C), 1× 100/1000 Base-T RJ45 Ethernet Port 4x Mini HDMI (Type C), 1x 100/1000 Base-T RJ45 Ethernet Port Decode support Encode support Part number Card type Memory Output support Input support Power consumption Weight Dimensions Regulatory compliance Matrox Display Wall – System Buil

Hardware summary – Matrox LUMA Pro Series The Matrox LUMA Pro Series family of products includes the following key features:  Pair up to four (4) LUMA Pro Series cards for up to 16x synchronized 2x 8K @60Hz/5K @120Hz or 4x 5K @ 60Hz HDR 12b outputs Support for an over-the-top ribbon synchronization cable (no need for additional synchronization card) PCIe 4.0 x16 (x8 electrical) bus interface for higher bandwidth capabilities HDCP compliant when used with Matrox Mura IPX HDMI Capture Series cards Matrox LUMA A380P – Four DisplayPort 2.1 outputs, each with a maximum resolution of 2x 8K @60Hz/5K...

Matrox LUMA A310FP Part number Card type Form factor Output support Input support Power consumption Weight Dimensions* Regulatory compliance 50 W Total 179 g L: 6.6 in / W: 0.737 in / H: 2.7 in L: 16.76 cm / W: 1.872 cm / H: 6.86 cm Class A: CE, FCC, ICES-3, RCM, KC, UKCA * Length and height dimensions are with fansink and bracket. Matrox Display Wall – System Builder’s Guide

Why choose a validated platform? Matrox display wall products are designed for control rooms, operation centers, and other critical environments that require stable, reliable, and durable solutions. Matrox display wall products work in numerous non-validated, commercial-off-the-shelf (COTS) motherboards and systems, but only a select few of these off-the-shelf solutions can be thoroughly tested, verified, and validated by Matrox. Choosing a validated platform guarantees a high-quality solution to drive your display wall system. Some of the key benefits of using a Matrox-validated platform include:...

LUMA Pro Series system requirements For LUMA Pro Series based display walls (with or without Mura IPX Series cards), the demands and requirements of a system are more generic. To use as a LUMA Pro Series based display wall, a system must meet the following requirements:  The system must be properly ventilated and the Mura IPX Series and LUMA Pro Series cards must not exceed the maximum allowed temperature. For more information, see “System ventilation”, page 25. Mura IPX Series cards used in a non-validated system must have a fansink. The system must be populated with at least 64 GB of system...

Validated systems The following systems have been validated by Matrox to work with the Matrox Mura IPX Series and the Matrox LUMA Pro Series (A380P and A310FP) products. Note: Ensure that you have the following default settings to launch the Windows operating system:  In the system BIOS main page, go to Boot Tab  Boot Mode Select and select UEFI. In the system BIOS main page, go to Boot Tab  CSM  Launch CSM and select Disabled. Note: Ensure that you have the following default settings:  In the system BIOS, go to Advanced  PCI Subsystem Settings  Re-Size Bar and select Enabled. In the system...

Supermicro SYS-551A-T LUMA Pro Series based controllers Third-party based controllers Maximum number of cards supported Maximum supported Mura IPX Series Maximum supported LUMA Pro Series Windows 10 Enterprise LTSC; Version 10.0.19044 Build 19044 System BIOS version System memory Power supply PCIe expansion slots  Ensure to order the air-cooled configuration for the chassis.  One 120 mm x 120 mm x 25 mm 6.4 KRPM optional fan (Part#: FAN-0222L4) must be ordered for the rear fan separately for air-cooled configuration when ordering the system.  Two 120 mm x 120 mm x 25 mm 59 CFM front fans that...

Performance considerations with LUMA Pro Series controller Slot Motherboard layout Matrox Display Wall – System Builder’s Guid

Matrox Display Wall – System Builder’s Guide

Validated motherboards The following motherboards have been validated by Matrox to work with Matrox Mura IPX Series, Matrox LUMA A380P, and Matrox LUMA A310FP products. Note: Ensure to have the following default settings to launch the Windows operating system:  In the system BIOS main page, go to Boot Tab  Boot Mode Select  and select UEFI. In the system BIOS main page, go to Boot Tab  CSM  Launch CSM and select Disabled. Note: The motherboard must be populated with at least 64 GB of system memory. Follow the system or motherboard manufacturer’s guideline for memory population sequence....