Product Catalogue LD (Light Duty)
Product Catalogue LD (Light Duty)
This section discusses various belt lacing systems tailored for light tensile conveyor belts, including low profile, round wire, and spiral fasteners. Each system is designed for specific applications and belt thicknesses to ensure optimal performance and durability.
The U24 and H24 fasteners are intended for high wear applications, such as spliced belts in round balers. The U24 is installed using a vice lacer, while the H24 requires a hammer lacer. They offer high strength and long splice life, with U24 suitable for 4-7 mm belts and H24 for 5-6 mm belts.
Connecting pins are vital for splice performance. A selection chart helps choose the right pin based on tension, flexibility, and resistance needs. Accessories include installation tools and vice lacers to aid the installation process.
Tools for U24 and H24 systems include vice lacers and hammer lacers. The vice lacer can be used with pneumatic or hydraulic systems for high-volume lacing, while the hammer lacer requires a flat base and comes in various widths for different belt sizes.
The catalogue provides detailed order numbers and specifications for each fastener type, including belt thickness compatibility and packing units, ensuring customers can select appropriate fasteners and accessories.
Key specifications for fasteners and connecting pins include:
- Pitch: 1.7 mm for belt thicknesses of 1.6 - 2.4 - 3.4 mm.
- Wire measurements: 0.65 x 0.5 mm.
- Material: Stainless Steel 316L (1.4404).
- Maximum operating temperature: 150°C / 302°F.
Hydraulic installation machines MATOHYD 260 WP and MATOHYD 480WP are described for high-quality and economical patch splices, featuring touch screen interfaces, multiple installation programs, adjustable parameters, and water cooling.
Different fastener series are detailed for various applications:
- Rectangular Wire Fasteners: M50, M60, M70 series with pitches of 1.7 mm, 2.54 mm, and 3.175 mm, used in industries like filter, airport, food, and laundry.
- Round Wire Fasteners: R60, R70, R80, R20, R30 series with pitches of 3.175 mm and 3.67 mm, used for light-duty belts.
Accessories include belt cutters, spare blades, belt clamps, and supergrip skivers for patterned and rough top belts.
A selection chart for connecting pins highlights material options like Nylon, Stainless Steel, and PEEK, with properties such as wear resistance and temperature consistency.
Charts assist in selecting appropriate fastener sizes and types based on belt thickness, pulley diameter, and other parameters.
- Plate Fasteners: Lists EasyClip plate fasteners with varying lengths and order numbers.
- Connecting Pins: Describes connecting pins made from nylon-covered steel cables and stainless steel, categorized by diameter.
- Splicing Kits: Describes splicing kits for quick conveyor belt repairs, including components like lacing strips and installation tools.
- Installation Tools: Lists tools like the EasyFix Tool EFT with sizes and order numbers.
- Belt Fasteners: Details various belt fasteners with specifications on connecting pin diameter and material type.
- Accessories: Lists accessories for connecting pins, such as retaining washers.
- Materials: Products are made from nylon-covered steel, stainless steel, and special steel.
- Dimensions: Provides detailed dimensions for each product.
- Applications: Designed for conveyor belt systems, offering solutions for splicing, repairing, and fastening.
Quotations are not binding unless explicitly stated. The supplier retains ownership and copyright of all estimates and documents.
Defined by the supplier's written order confirmation. Changes require written confirmation.
Prices are ex-works, excluding packing and VAT. Payment is due within 30 days, with a 2% discount for payments within 14 days. Orders under EUR 50 incur an additional EUR 15 handling charge.
Starts with order confirmation and may extend due to labor disputes or unforeseen impediments. Compensation for delays is limited to 5% of the affected delivery value.
Risk transfers to the purchaser upon dispatch. Partial deliveries are allowed.
The supplier retains ownership until full payment is received. Insurance is at the purchaser's expense.
Defects reported within six months will be repaired or replaced. No warranty for damage due to improper use.
If the supplied object cannot be used as intended due to supplier's fault, the rulings in Sections VII and IX apply.
Outlines the rights of the purchaser to withdraw from a contract if the supplier fails to deliver. In cases of partial delivery, the purchaser can refuse if it does not meet the agreed quantity or quality.
The purchaser can set an extension period for the supplier. If unmet, the purchaser can withdraw from the contract.
The supplier's liability is limited to foreseeable damages typical of the contract.
Legal proceedings are conducted at the court with jurisdiction over the supplier's head office or the branch that made the delivery.
Provides contact details for MATO GmbH & Co. KG and its global branches, highlighting their expertise in belt maintenance products.
Catalog excerpts
Belt Maintenance Equipment - Belt Lacing <750kN/m
Open the catalog to page 1
MATO GmbH & Co KG, Main Production Facility and Administration Headquarters, Mühlheim a.M., Germany
Open the catalog to page 2
Belt Lacing Systems for Light Tensile Conveyor Belts High Performance Plate Fasteners U24 and Accessories High Performance Plate Fasteners H24 and Accessories Connecting Pins for Systems U24 / H24 PATCH-Fastener Series M50-P and M60-P for laundry Industry (cut to length) Low Profile Fastener Series M50, M60 (without PATCH) for laundry Industry (cut to length) Installation Tools and Accessories for PATCH-Fasteners Accessories and Connecting Pins Low Profile Fastener Series M50, M60, M70 Round Wire Fastener Series R70, R80, and R20, R30 Installation Tools and Accessories for Low Profile and Round...
Open the catalog to page 3
High Performance Fasteners U24 / H24 Hammer Installed Plate Fasteners for Hay Balers, Agriculture and Industry The High Performance Fasteners U24 and H24 have been developed for very high wear applications such as spliced belts used in Round Balers. They are proven to be the highest performing splice on the market due to high strength and long splice life and will perform equally well in other applications. The U24 fastener is suitable for belts in the range of 4 - 7 mm thickness. The H24 fastener is only suitable for belts in the range of 5 - 6 mm thickness. Press fit of stainless steel rivets...
Open the catalog to page 5
Selection Chart for Connecting Pins for High Performance Plate Fasteners U24 / H24 The MATO Connecting Pins are aligned in design and material composition to the MATO Fasteners. Choosing the right Connecting Pin is an important contribution to reach the optimum performance of the splice in your application. Belt Width Fastener Strip Number of (mm) Length (mm) Fasteners Connecting Pins High Tension Troughing Flexibility Application Rust Resistant Chemical Resistant Wear Properties poor ○○○○○
Open the catalog to page 6
High Performance Fasteners U24 Hammer Installed Plate Fasteners for Vice Lacers Belt Width Description mm Belt Fastener U24AS, without Connecting Pin Belt thickness 4.0-5.0 Belt Fastener U24BS, without Connecting Pin Belt thickness 5.0-6.0 Belt Fastener U24CS, without Connecting Pin Rivets: Stainless Steel 304 Plate Material: Chromium Steel 430 - High compression in the belt - Rivets are press fit rivets in the plate. - Cold forged plate and loops for highest strengths - High wear resistance and long life properties Belt Fastener U24AS, with Connecting Pin T1F (Dia. 3.0 mm) - Min. Pulley Diameter...
Open the catalog to page 7
High Performance Fasteners U24 Hammer Installed Plate Fasteners for Vice Lacers Belt Width Description mm Belt Fastener U24BS, with Connecting Pin T2F (Dia. 3.4 mm) Belt thickness 5.0-6.0 Rivets: Stainless Steel 304 Plate Material: Chromium Steel 430 Belt Fastener U24CS, with Connecting Pin T2F (Dia. 3.4 mm) Belt thickness 6.0-7.0 + Material of Connecting Pin: Notched Spring Steel - High compression in the belt - Rivets are press fit rivets in the plate. - Cold forged plate and loops for highest strengths - High wear resistance and long life properties - Min. Pulley Diameter 75mm - Belt Strength...
Open the catalog to page 8
Installation Tools (Vice Lacer) U24 Vice Lacer Profi Every Vice Lacer is supplied with a hand punch. The lacers are designed to be used in a bench vice, Profi 5-55 will hold 5 hooks at a time and the Profi 19-209 will hold 19 hooks at a time etc. For example: If you want to install a splice with 17 fasteners (187 mm), the installation is made in four steps using the Profi 5-55 and in one step, using the Profi 19209. Vice Lacer Profi 19-209 Profi 5-55 incl. Punch Profi 19-209 209 mm incl. Punch and prepared for mounting an optional Rivet Flattening Bar 275 mm Profi 25-275 incl. Punch and prepared...
Open the catalog to page 9
Profi Belt Lacing Set consists of: - Vice Lacer Profi 19 - Belt Skiver 18 Pro (skiving depth adjustable) - Pneumatic Hammer with Punch - Tool box
Open the catalog to page 10
High Performance Fasteners H24 Hammer Installed Plate Fasteners for Hammer Tools (Installation without Vice) Belt Width Description mm Belt Fastener H24BS, without Connecting Pin Belt thickness 5.0-6.0 Rivets: Stainless Steel 304 Plate Material: Chromium Steel 430 - High compression in the belt - Rivets are a press fit rivets in the plate. - Cold forged plate and loops for highest strengths - High wear resistance and long life properties Packing Units: e. g. PU 10 includes 10 strips of fasteners. Strip length can easily be shortened. Belt Fastener H24BS, with Connecting Pin T2F (Dia. 3.4 mm)...
Open the catalog to page 11
Profi Installation Units (Installation without Vice) Working Width H24 Profi Installation Units + Accessories The Profi Installation Units are designed to be used on a work bench or any flat solid base. It might be also used directly on site. All Profi tools can be used for continuous splicing. Using a 300g hammer or a pneumatic hammer to install the the fastners. Installation Unit H24 Profi 15-180 Guide Block H24 Profi 15 41 129 70 00 common to all 24 - Profi Installation Units Guide Block H24 Profi 30 41 129 70 11 recommended only for H24 - Profi 30-1000 (without picture) Punch H24 Profi (Spare)...
Open the catalog to page 12
Installation Units and Accessories System H24 Eco Installation Units (Installation without Vice) Installation Units H24 ECO + Accessories The Eco Installation Units are designed to be used on a work bench or any flat solid base. It might be also used directly on site. All Eco tools can be used for continuous splicing. Using a 300g hammer or a pneumatic hammer to install the the fastners. Guide Block H24 Eco15 for Eco Installation Units Profi 180 or 350 Basis Set consists of : - Profi Installation Unit 180 or 350 - Belt Skiver 18 - Hammer 300g - Tool box
Open the catalog to page 13
Special for small volumes Working Width Installation Units H24 BALERTOOL 5-55 The Balertool is a small convenient hammer tool for the installation of H24 fasteners. To be used on a work bench or any flat solid base. It might be also used directly on site. The tool life is limited compared with Eco and Profi installation units . Usage movie H24 BS Eco-Belt Lacing Set, with Connecting Pin T2F Packing Units: e.g. PU 4+ includes: 4 strips of H24BS fasteners and 2 connecting pins T2F 12
Open the catalog to page 14All MATO catalogs and technical brochures
Lube-Shuttle2 Pages
Lubrication Equipment120 Pages
Belt Cleaner12 Pages
