Product Catalogue HD (Heavy Duty)
Product Catalogue HD (Heavy Duty)
This section describes various belt lacing systems suitable for high tensile conveyor belts with strengths over 750 kN/m. It includes both machine-installed and hammer-installed options, each designed for specific applications and belt types.
The catalogue introduces high-performance fasteners like U68, U30, and S30S, noted for features such as high compression, staple guard, and cold-forged plates. These fasteners are built for durability and wear resistance, with models tailored to different belt strengths and environmental conditions.
Eco-Fasteners are presented as a cost-effective solution for applications with regular and short runtime, featuring special steel staples and carbon steel plates optimized for specific material combinations.
A variety of accessories and tools are available to aid in the installation and maintenance of belt fasteners, including pneumatic and hydraulic lacers, machine skivers, and clamping frames, all designed to improve installation efficiency and accuracy.
Specifications and selection charts are provided for each fastener type, detailing belt width, thickness, and order numbers to assist in selecting the appropriate fastener based on specific belt requirements.
The catalogue includes repair fasteners and belt repair systems like the MATO BOND, a two-component PU system for belt repair, aimed at extending belt life and reducing downtime.
The document outlines the supplier's liability, limited to foreseeable damages typical of the contract, with exclusions not applying in cases of product liability law for damage to persons or property on privately used objects, or when promised properties are absent.
If the supplier's fault renders the object unusable due to incorrect implementation of suggestions or advice, specific rulings apply, excluding further claims by the purchaser.
The purchaser can withdraw from the contract if the supplier cannot deliver before the transfer of risk or if a delivery delay occurs. If the supplier fails to repair or supply a replacement, the purchaser can cancel the contract, with further claims excluded unless there is intent or gross negligence by the supplier.
Disputes from the contractual relationship are to be resolved at the court with jurisdiction for the supplier's head office or the branch that made the delivery.
MATO GmbH & Co. KG, based in Mühlheim, Germany, offers products for belt maintenance, lubrication equipment, and fluid handling, with contact information for various MATO offices worldwide.
Catalog excerpts
Belt Maintenance Equipment - Belt Lacing >750kN/m
Open the catalog to page 1
MATO GmbH & Co KG, Main Production Facility and Administration Headquarters, Mühlheim a.M., Deutschland
Open the catalog to page 2
Table of Contents Belt Lacing Systems for High Tensile Conveyor Belts High Performance Fasteners U68, Machine Installed Plate Fasteners and Accessories High Performance Fasteners U30, Machine Installed Plate Fasteners, Stainless Steel Fasteners S30S, Machine Installed Plate Fasteners Connecting Pins for Systems U68, U30, S30S, E30 Stainless Steel Fasteners H60S, H30S, Hammer Installed Plate Fasteners Eco-Fasteners H60E, H30E, Hammer Installed Plate Fasteners Accessories for Hammer Installed Systems H60, H30, MR30 Eco-Fasteners MR30, Hammer Installed Plate Fasteners Connecting Pins for Systems...
Open the catalog to page 3
Selection Chart for Machine Installed Plate Fasteners Fasteners U68 and U68A are another step-up compared to our U30 Fasteners. Additionally, Fasteners U68 and U68A have a deeper reachback and higher plate thickness, for more safety and wear resistance. The outstanding features of both types are: The S30S-System is used in applications where higher corrosion is a problem. In comparison to U30, the S30S has stainless steel staples with press fit specialised to the material combinations. The E30-System is used in applications with regular and short runtime. In comparison to U30, the E30 has special...
Open the catalog to page 5
High Performance Fastener U68 Machine Installed Plate Fasteners Belt Width Belt Thickness Belt Fastener U68A - Standard Belt Strength up to 4000 kN/m Minimum Pulley Diameter 600mm Belt Fastener U68 - Standard Belt Strength up to 4000 kN/m Minimum Pulley Diameter 600mm -High compression into the belt -Press fit of staples -Staple guard -Cold forged plate with loops for highest strengths -High wear resistant plate material (chromium steel) -High tensile spring steel staples Staple Material: Spring Steel Plate Material: Stainless Chromium Steel Pricing: based on boxes with Fastener Strips of 200mm...
Open the catalog to page 6
High Performance Fastener U30 Machine Installed Plate Fasteners Belt Width Belt Thickness Belt Fastener U35A - Standard Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm Belt Fastener U35 - Standard Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm Belt Fastener U37A - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Belt Fastener U37 - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Belt Fastener U38A - Standard Belt Strength up to 3500 kN/m Minimum Pulley Diameter 500 mm 4.5 -High compression into the belt -Press fit of staples...
Open the catalog to page 7
Stainless Steel Fastener S30S Machine Installed Plate Fasteners Belt Width Belt Thickness Belt Fastener S35AS - Standard Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm Belt Fastener S35BS - Standard Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm Belt Fastener S37AS - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Belt Fastener S37BS - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm 3.9 -High compression into the belt 4.5 Belt Fastener S37CS - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 500 mm -Staple guard...
Open the catalog to page 8
Machine Installed Plate Fasteners Belt Width Belt Thickness Belt Fastener E35A - Standard Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm Belt Fastener E35B - Standard Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm Belt Fastener E37A - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Belt Fastener E37B - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Belt Fastener E37C - Standard Belt Strength up to 1400 kN/m Minimum Pulley Diameter 500 mm 3.2 3.6 4.5 -Light compression into the belt -Staple guard -Cold forged plate with loops...
Open the catalog to page 9
Accessories for Machine Installed Systems U30, S30S, E30, Belt Width Screw Clamping Frame MF (Stainless Steel - makes belt handling easier) For use with Lacers HM, LM, and YMD-2SI as well as Belt Skivers S, HD, XTV / XTV-BS. For installation of Fastener series U30, S30S, and E30. Quickens the installation process and minimizes errors Lacers with manual transport Manual Lacer HM 35-38 For use with Frames S, SS and MF. The Manual Lacer HM 35-38 installs all Fasteners of the series U30, S30S, E30. Driven by manual force Pneumatic Lacer LM 35-38 For use with Frames S, SS and MF. The Pneumatic Lacer...
Open the catalog to page 10
Accessories Hydraulic Lacer YM-D2S 35-68 Description Storage Case Solid sheet metal Storage Case - it will ensure safe transport and storage of the Lacer YMD2S. It comes with a hinged cover and 2 swivelling handles. Measurements inside 470 x 248 x 348 mm (LxWxH) Hydraulic Power Pack for Lacer YM-D2S 35-68 Compact-Hydraulic Power Pack specially aligned for use with the Lacer YM-D2S 35-68. Dual-circuit Power Pack with 120/140 bar, available in different electrical types. Suitable for continuous use with Lacer YM-D2S 35-68. Compact-Hydraulic Power Pack YM-D2S 400V/50Hz/3Phases Compact-Hydraulic...
Open the catalog to page 11
Accessories for Machine Installed Systems U30, S30S, E30 Belt Thickness Machine Skiver S In order to reduce top cover thickness of conveyor belts. To use with Frames S, SS and MF. Belt thickness range 5-20mm. Crank Drive. Skiver Blade S for Machine Skiver Machine Skiver HD In order to reduce top cover thickness of conveyor belts. To use with Frames S, SS and MF. Belt thickness range 15-30mm. Crank Drive. Skiver Blade HD for Machine Skiver Machine Skiver XTV-BS In order to reduce top cover thickness of conveyor belts. To use with Frames S, SS, and MF. Belt thickness range 7-31mm. Skiving on both...
Open the catalog to page 12
Accessories for Machine Installed Systems U30, S30S, E30 Description Wave Master Systems WSS and Optimat In order to minimize wave and bowing when installing machine fasteners Wave Master Kit (Metal Box) V2 (Clamping Unit with Quick Clamping Device, 20 Tension Ropes with one end, safety ferrule (2600 mm), Pincer and Distance Holder) WSS-Installation Unit (PU= 10 pieces) consists of Clamping Unit and Clamping Piece Tension Ropes with one end safety ferrule (PU= 20 pieces) L=1800 mm for WSS Installation Unit Tension Ropes with one end safety ferrule (PU= 20 pieces) L=2600 mm for WSS Installation...
Open the catalog to page 13All MATO catalogs and technical brochures
Lube-Shuttle2 Pages
Lubrication Equipment120 Pages
Belt Cleaner12 Pages
- VirtualExpo Group
- Our Partners
- Recruitment
- Testimonials