Fully automatic folding machine >> Advantages at a glance - Automatic setting of: - Feeder - Alignment rails - Fold plate stops - Deflectors and fold rollers - Delivery rollers - 20 standard folds are pre-programmed - Other folds are freely programmable - Program memory for 200 jobs - 4 or 6 fold plates in each folding unit - High degree of adaptability prestigeFOLD NET 52 The intelligent machine control with touchscreen operation makes folding easy. All important settings are made by means of a central operator panel. The operator guidance is selfexplanatory and organized analogous to a conventional card file. The operator knows at any time which menu is active and which options are available. All setting elements at the flat pile feeder, fold plate stops, deflectors, fold rollers, alignment rails and delivery rollers are controlled automatically. Setting measurements can be entered with a precision of 0.1 mm resp. even 0.01 mm for the fold rollers. >> Simple operation >> Short set-up times >> A minimum of waste Specifications: Paper sizes: max. 52 x 85 cm min. 10 x 12 cm Fold length: max. 48.0 cm; min. 3.5 cm / 1.8 cm (KF 31) Paper weight: 40 - 250 GSM Speed: 220 m/min (depending on material) Electrical: 3 x 400 V / 50 Hz / N / PE AUTOMATION FOR EFFICIENCY. MB Bäuerle GmbH · Gewerbehallestr. 7-11 · 78112 St. Georgen · Tel. +49 7724/882-200 · E-Mail: center@mb-bauerle.

prestigeFOLD NET 52 >> Increased benefit through optional equipment MS 45 Mobile knife fold unit Usable after 1st or 2nd fold unit Knife rotates by 180° Timed perforation and cutting Infeed width: max. 450 mm; min.120 mm Infeed length: max. 330 mm; min. 100 mm Cutting module KF 31 Attachable additional fold unit with two fold plates Especially for small folds Plough fold Infeed width up to 310 mm Fold length: max. 110 mm; min. 18 mm Gluing device SKM 36 Small format vertical stacker Prevents small folds from opening up Infeed width: max. 360 mm; min. 50 mm Scoring device Reading device Technical...