Pharmaceutical folder as Stand-alone folding system

Product catalog summary

Overview: The leafletFOLDER NET 21 is a stand-alone folding system designed for pharmaceutical applications. It features a computer-controlled interface with a touch-screen for simplified operation, allowing for easy setup and adjustment of folding parameters.

Key Features:

Automatic settings for fold plates, rollers, and code reading heads.
16 standard folds pre-programmed with the option for custom folds.
Memory capacity for 200 repetitive jobs, enhancing user-friendliness and efficiency.
No need for manual calculation of stop positions or removal of fold plates.
Operation is accessible from the front side of the machine.

Specifications:

Paper Sizes: Version I supports max 216 x 320 mm, min 75 x 85 mm; Version II supports max 216 x 600 mm, min 75 x 85 mm.
Fold Length: Maximum 225 mm, minimum 15 mm.
Paper Weight: 40 - 80 GSM for both single and multilayer papers.
Speed: Up to 500 cycles per minute, depending on material.

Advantages:

Simple operation with short setup times and minimal waste.
Optimized equipment with a feeder that separates unfolded and pre-folded sheets, accommodating stack heights up to 2,500 sheets.
Fold rollers are polyurethane-steel with a self-cleaning effect, ensuring long service life and low maintenance.
Fold plates are automatically adjustable with integrated deflectors to prevent paper marks.

Optional Equipment:

Reading heads for one- or two-sided reading.
Professional scoring device and diverter after the fold unit.

Additional Information: The system includes a small format vertical stacker SKM 36 to prevent small folds from opening, with an infeed width of max 360 mm and min 50 mm, and a smallest fold length of 16 mm.

Catalog excerpts

Pharmaceutical folder as Stand-alone folding system-1

Pharmaceutical folder as Stand-alone folding system >> Advantages at a glance - Automatic fold plate setting - Automatic fold roller setting - Automatic positioning of code reading heads - 16 standard folds are programmed - Other folds are freely programmable - Memory for 200 repetitive jobs - No calculating of stop positions - No removal of fold plates - No need to install deflectors - Operation from the front side leafletFOLDER NET 21 offline The computer control simplifies machine operation. A touch-screen is the interactive operator interface where all important settings are made. After the paper size and the type of fold have been entered, the fold plate stops and deflectors move to their calculated positions by pushing a button. The fold rollers are also set automatically. The basis for this is the chosen type of fold and the predetermined paper thickness. Setting up saved jobs is even more user-friendly, because all individual corrections are considered and accurately reproduced. >> Simple operation >> Short set-up times >> Minimum waste Specifications: Paper sizes: Version I: Version II: Besides the settings of fold plate stops, deflectors, fold rollers and reading heads the data for speed, counter and kicker are also predetermined. Fold length: max. 225 mm; min. 15 mm Paper weight: 40 - 80 GSM (single and multilayer) Speed: max. 500 cycles/min (depending on material) AUTOMATION FOR EFFICIENCY. MB Bäuerle GmbH · Gewerbehallestr. 7-11 · 78112 St. Georgen · Tel. +49 7724/882-200 · E-Mail: center@mb-bauerle.

Open the catalog to page 1

Pharmaceutical folder as Stand-alone folding system-2

leafletFOLDER NET 21 Optimized equipment Feeder with swivel-mounted feed table - Separates unfolded und pre-folded sheets - Stack height up to 2,500 sheets (DIN A4; 50 GSM) - Replenishing from the top without machine stop - Swivel-mounted, therefore good accessibility for maintenance jobs - Feed table available in two versions: for paper sizes up to a length of 320 mm for paper sizes up to a length of 600 mm Fold rollers - Polyurethane-steel-fold rollers with self-cleaning effect - Long service life - Automatically adjustable - Driven by low-noise, almost maintenance-free flat belts Fold plates...

Open the catalog to page 2