Overview

This document provides technical specifications and performance data for the LGU75-P series mechanical components, focusing on output torque, dimensions, and model variations.

Specifications

• Output Torque: Maximum output torque values are provided for different models, ranging from 3.111 Nm to 4.8 Nm.
• Speed Ratio: Actual speed ratios are listed for each model, including 3.111 and 3.714.
• Weight: Each model weighs approximately 130 to 150 grams.
• Dimensions: Input and output shapes include serration holes (12×11×1), D cut holes (φ8×7), and serration shafts (12×11×1).

Model Variants

• LGU75-PAD Series: Models include LGU75-3PAD, LGU75-4PAD, and LGU75-5PAD with output torques of 3.111 Nm, 3.714 Nm, and 4.8 Nm respectively.
• LGU75-PLD Series: Models LGU75-3PLD, LGU75-4PLD, and LGU75-5PLD correspond to similar torque values as the PAD series.

Performance Curve

The output torque curve illustrates the relationship between output torque (Nm) and revolution speed (rpm), indicating performance characteristics of the LGU75-P series units.

Additional Information

• Optional parts are referenced on page 36 for further customization.
• The unit type is specified as φ75 with a nominal torque of 4.5 Nm.
• These units are made-to-order in lots, with a dimension reference of 14 mm.

Summary

This document serves as a technical reference for selecting LGU75-P series components based on torque requirements, speed ratios, and dimensional constraints. It highlights model differences, mechanical interfaces, and performance data essential for engineering applications.