STEEL TESTING EQUIPMENT

...BECAUSE WE NEVER STOP GROWING FOUR BUSINESS UNITS GLOBAL. INNOVATIVE. MANUFACTURER. Matest is an Italian company founded in 1986 by the family that still runs and manages operations. Thanks to its strong capital, the company is a forerunner in technological innovation and in continuous expansion. With an increasingly wide and comprehensive range of products, Matest is both a global player and a leading manufacturer of material testing equipment for the building industry. WHERE TECHNOLOGY MEETS THE PAVEMENT. Pavetest is the division of Matest committed to developing innovative dynamic testing...

UNIVERSAL TESTING SYSTEMS UNIVERSAL AUTOMATIC TENSILE TESTING MACHINES These machines are designed to meet requirements of works, laboratories and universities for quality control and research purposes. The system is suitable to test metallic round and flat rebars, to determine tension, compression, bending shear strength on steel and compression and flexure strength on concrete.

UNIVERSAL TESTING SYSTEMS TENSION TESTING CHAMBER Tensile tests on steel flat and round rebars Tensile tests on wire strands Wire rope tensile tests Nut bolt tests Tensile tests on headed and shouldered specimens COMPRESSION TESTING CHAMBER Bending tests on steel specimens Shear tests on round bars Compression tests on concrete cubes and cylinders Flexural tests on concrete beams Indirect tensile on cylinders, cubes and paving blocks Modulus of elasticity

UNIVERSAL TESTING SYSTEMS UNIVERSAL AUTOMATIC TENSILE TESTING MACHINES: 600 KN, 1000 KN, 1500 KN, 2000 KN CAPACITY STANDARDS: EN ISO 6892-1, EN 7500-1 | EN 10002, EN 10080, EN 50081-1, EN 15630-1, EN 15630-2, EN 15630-3 | ASTM A370, ASTM E8 UNI 7676 (Wire Strands) | ISO 5173 These machines are designed to meet requirements of works, laboratories and universities for quality control and research purposes. The system is suitable to test metallic round and flat rebars, to determine tension, compression, bending shear strength and to determine compression and flexure strength on concrete. LOAD FRAME...

UNIVERSAL TESTING SYSTEMS FIRMWARE Fully automatic test cycle with closed-loop digital feedback Electronic control unit “Servo-plus Progress” with Touch-Screen colour display, that runs like a standard PC based on Windows operating system for management and analysis of data, test results, graphs. The Touch-Screen icon interface allows an easy set-up of parameters and an immediate test execution. The machine can also be connected to a PC for a remote test execution through suitable Software. Direct connection to Intranet (connection to a LAN network) and Internet to establish a remote communication...

UNIVERSAL TESTING SYSTEMS CONTROL SYSTEM HYDRAULIC JAWS POWER PACKS Standard model, low clamping pressure only (3 buttons) Button panel, to control the lower crosshead movement for specimen positioning before testing. Strands model, possibility to switch between high (strands) and low (round and flat rebars) clamping pressure (4 buttons) TECHNICAL SPECIFICATIONS MODEL Load capacity (kN) both tension and compression Load accuracy (%) Deformation accuracy (%) Max crosshead moving speed (mm/min) Horizontal columns distance Columns diameter Length of the grips for standard samples Test speed (mm/min):...

UNIVERSAL TESTING SYSTEMS ACCESSORIES FOR MACHINE MODEL (load capacity*) Grips for round specimens Ø 6…14 mm Grips for round specimens Ø 13...27 mm Grips for round specimens Ø 28...40 mm Grips for round specimens Ø 9...21 mm Grips for round specimens Ø 22...41 mm Grips for round specimens Ø 42...60 mm Grips for round specimens Ø 8...20 mm Grips for round specimens Ø 16...32 mm Grips for round specimens Ø 33...47 mm Grips for round specimens Ø 48...61 mm Grips for round specimens Ø 62...80 mm Grips for round specimens Ø 13...31 mm Grips for round specimens Ø 32...60 mm Grips for flat specimens...

UNIVERSAL TESTING SYSTEMS 4 Columns for a high stiffness Upper head for moving during test performance 2 lead screws for lower head positioning before the test Easy grips replacement and maintenance Two testing chambers Test control unit Fast accessory positioning Second frame For other tests Hydraulic jaws closure ADDITIONAL ACCESSORIES C092-09 COMPRESSION FRAME, 2000 kN capacity, connected to the same control unit. Vertical daylight: 376 mm with a distance piece of 40 mm high. Useful to test concrete cubes up to 150 mm side and cylinders up to 160x320 mm also with capping retainers. Technical...

UNIVERSAL TESTING SYSTEMS Measuring base 50 mm, Deformation range +1 mm / -0.2 mm Maximum percent measurable deformation: +2% It gives the possibility to take the longitudinal deformations of the specimen during the tensile test. A graph load/deformation is obtained and from this graph the coefficient of elasticity together with the loads RP0.1 - RP0.2 - Rt1 can be identified even on materials that are not presenting a yield point that can be clearly identified. The appliance is delivered complete with connection cables. STANDARD: UNI 7676 The instrument is directly applied on the sample through...

UNIVERSAL TESTING SYSTEMS UNIVERSAL HYDRAULIC SERVO-CONTROLLED MACHINE 600 KN CAPACITY TO PERFORM STATIC TENSILE TESTS ON METALLIC MATERIALS. STANDARDS: EN 10002, EN 10080, EN 15630-1, EN 15630-3 | EN ISO 6892-1, 7500-1 | ASTM A370, ASTM E8 It basically consists of: - Strong loading frame with a reading cell built into the piston - Hydraulic Servo-Plus Progress Touch-Screen system (technical details: see p. 224 of the general catalogue), for the data acquisition, control and processing. The whole is built in a console. The frame is designed to carry out tensile tests using the grips placed in...

UNIVERSAL TESTING SYSTEMS ACCESSORIES FOR H003N ROUND AND FLAT GRIPS. One set consists of two double pairs that must be placed into the upper and lower tensile heads. H003-03 Set of Grips for Flat specimens from 2 to 18 mm and Round specimens Ø 5...12 mm H003-04 Set of Grips for Flat specimens 18...36 mm H003-07 Set of Grips for Round specimens from Ø 12...24 mm H003-08 Set of Grips for Round specimens from Ø 25...40 mm H003-12 BENDING TEST STANDARDS: UNI 564 | ASTM E290 The equipment is composed by a couple of lower bearers with adjustable supports and an upper blade. Maximum load: 200 kN Maximum...