- Catalogs
- MASTIP Technology Europe
- FlowLoc™ RangeTXTG16
FlowLoc™ RangeTXTG16
FlowLoc™ RangeTXTG16
- FlowLoc™ Range 27 Series: Includes Bush Nut, Standard Sprue Nut, Long Sprue Nut, and YCN Nut. Each type has specific nozzle codes for multi-hole torpedo tips, one-hole torpedo tips, and open tips, with availability in grades G1, G2, and G5.
- FlowLoc™ Range 16 Series: Covers Open Nut, Open Nut with Cap Insulator, Bush Nut Full Contact, and Standard Sprue Nut, with similar specifications and grade availability as the 27 Series.
- Gate cooling is critical for correct operation and gate quality. Refer to the Cooling section in Technical Specifications.
- Models TX27225 - TX27275 use two heaters, with a larger pocket to accommodate the front heater wiring.
- Modify the contact area of the bush nut and sprue nut to suit specific applications. Adjust gate diameter and land as needed.
Catalog excerpts
ge Mastip Manifold Nozzles Refer to the System Selection Guide for the nozzle assembly order code incorporating Tips and Nuts Note: Nozzle dimensions and date referenced in this technical guide are only to be used for Nexus™ manifold systems TXTG16-2 © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.com mastip
Open the catalog to page 2
Mastip Manifold Nozzles FlowLoc™ Range Multi-hole Torpedo Tip Nozzle Code One-hole Torpedo Tip Nozzle Code Open Tip Nozzle Code Longer nozzle lengths available on request Maximum length: 300mm Nozzle Fitment and Gate Dimensions E = (PL + (20/2)) x 0.0000125 x (nozzle temp. °C - mould temp. °C) Note 1. Gate cooling is critical for correct operation and gate quality. 2. Modify gate diameter and land to suit the part. See Cooling section in Technical Specifications. See Gate Modifications in Technical Specifications. © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip...
Open the catalog to page 3
FlowLoc™ Range 16 Series Bush Nut Full Contact Mastip Manifold Nozzles Tip and Nut Material Grade Availability Tip and Nut Grade Tip (Code) *Larger gate diameters are available as standard Refer to the System Selection Guide for the nozzle assembly order code incorporating Tips and Nuts Nozzle Dimensions Note: Nozzle dimensions and date referenced in this technical guide are only to be used for Nexus™ manifold systems Note 1. Modify the contact area of the bush nut to suit the application. Modify gate diameter and land to suit the part. See Gate Modifications in Technical Specifications. © Copyright...
Open the catalog to page 4
Mastip Manifold Nozzles FlowLoc™ Range 16 Series Bush Nut Full Contact Multi-hole Torpedo Tip Nozzle Code One-hole Torpedo Tip Nozzle Code Open Tip Nozzle Code *Longer nozzle lengths available on request Maximum length: 600mm Nozzle Fitment and Gate Dimensions E = (PL + (20/2)) x 0.0000125 x (nozzle temp. °C - mould temp. °C) Note 1. Gate cooling is critical for correct operation and gate quality. See Cooling section in Technical Specifications. © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.co
Open the catalog to page 5
FlowLoc™ Range Mastip Manifold Nozzles Tip and Nut Material Grade Availability Tip and Nut Grade Tip (Code) *Larger gate diameters are available as standard Refer to the System Selection Guide for the nozzle assembly order code incorporating Tips and Nuts Nozzle Dimensions Note: Nozzle dimensions and date referenced in this technical guide are only to be used for Nexus™ manifold systems Note 1. Modify the contact area of the bush nut to suit the application. Modify gate diameter and land to suit the part. See Gate Modifications in Technical Specifications. © Copyright Mastip Technology Limited....
Open the catalog to page 6
Mastip Manifold Nozzles FlowLoc™ Range Multi-hole Torpedo Tip Nozzle Code One-hole Torpedo Tip Nozzle Code Open Tip Nozzle Code Longer nozzle lengths available on request Maximum length: 600mm Nozzle Fitment and Gate Dimensions E = (PL + (20/2)) x 0.0000125 x (nozzle temp. °C - mould temp. °C) Note 1. Gate cooling is critical for correct operation and gate quality. See Cooling section in Technical Specifications. © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.co
Open the catalog to page 7
r 16 Series Standard Sprue Nut ge Mastip Manifold Nozzles Tip and Nut Material Grade Availability *Larger gate diameters are available as standard Refer to the System Selection Guide for the nozzle assembly order code incorporating Tips and Nuts Note: Nozzle dimensions and date referenced in this technical guide are only to be used for Nexus™ manifold systems Note 1. Modify the contact area of the sprue nut to suit the application. Modify gate diameter and land to suit the part. See Gate Modifications in Technical Specifications. TXTG16-8 © Copyright Mastip Technology Limited. Information subject...
Open the catalog to page 8
Mastip Manifold Nozzles FlowLoc™ Range 16 Series Standard Sprue Nut Multi-hole Torpedo Tip Nozzle Code One-hole Torpedo Tip Nozzle Code Open Tip Nozzle Code Longer nozzle lengths available on request Maximum length: 600mm Nozzle Fitment and Gate Dimensions E = (PL + (20/2)) x 0.0000125 x (nozzle temp. °C - mould temp. °C) Note 1. Gate cooling is critical for correct operation and gate quality. See Cooling section in Technical Specifications. © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.co
Open the catalog to page 9
ge Mastip Manifold Nozzles Refer to the System Selection Guide for the nozzle assembly order code incorporating Tips and Nuts Note: Nozzle dimensions and date referenced in this technical guide are only to be used for Nexus™ manifold systems Note 1. Modify the contact area of the sprue nut to suit the application. Modify gate diameter and land to suit the part. See Gate Modifications in Technical Specifications. TXTG16-10 © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.com mastip
Open the catalog to page 10
Mastip Manifold Nozzles FlowLoc™ Range 16 Series Extra Sprue Nut Longer nozzle lengths available on request Maximum length: 600mm Nozzle Fitment and Gate Dimensions E = (PL + (20/2)) x 0.0000125 x (nozzle temp. °C - mould temp. °C) Note 1. Gate cooling is critical for correct operation and gate quality. See Cooling section in Technical Specifications. mastip © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.com TXTG16-11
Open the catalog to page 11
ge Mastip Manifold Nozzles Refer to the System Selection Guide for the nozzle assembly order code incorporating Tips and Nuts Note: Nozzle dimensions and date referenced in this technical guide are only to be used for Nexus™ manifold systems Note 1. Modify the contact area of the sprue nut to suit the application. Modify gate diameter and land to suit the part. See Gate Modifications in Technical Specifications. TXTG16-12 © Copyright Mastip Technology Limited. Information subject to alteration. www.mastip.com mastip
Open the catalog to page 12All MASTIP Technology Europe catalogs and technical brochures
hot runner solutions45 Pages
Nexus™ Systems2 Pages
- Valve
- Stainless valve
- Control valve
- Pneumatic valve
- Threaded valve
- Digital temperature control
- Gate valve
- Standard valve
- Valve actuator
- Compact valve
- Stainless steel nozzle
- Metal nut
- Temperature controller
- Digital temperature controller
- Metal nozzle
- Automation temperature controller
- Multi-jet nozzle
- PID temperature control
- Cooling nozzle