Catalogs >
Masterflex SE >
Master-Clip HT 450

Master-Clip HT 450
3Pages

Catalog excerpts

Master-Clip HT 450 Article Master No.: 000324 Exhaust gas hose for exhaust gas temperatures up to +450°C, two layers Hydrolysis resistant Microbe resistant flame retardant very flexible medium heavy moderately pressure resistant Product Details Construction / Material Type of construction: Spiral hose with clamping profile Design of the helix: metal band\, formed as a clamping profile Material of the helix: Steel strip\, hot-dip galvanised Design of the external spiral: designed as an additional protective profile Execution of the wall: coated, double-layered Specifications of the wall: flame retardant according to DIN EN 13501-1 (class B1\, s2: medium smoke development; d0: no burning droplet/fall within 600 seconds) Design of the inner layer: reinforced by interwoven VA wire, heat-resistant impregnation Material of the inner layer: glass fabric Execution of the external layer: Coating with heat stabilisers Material of the outer layer: High temperature fabric Properties Chemical Properties: good resistance to chemicals, good UV resistance, good ozone resistance, weatherresistant Flexibility: very flexible Weight: medium heavy Pressure Resistance: moderately pressure resistant Colour: silver grey Other: increased vacuum resistance due to woven-in reinforcing components

Open the catalog to page 1

Master-Clip HT 450 | Article Master No.: 000324 Operating Temperature Temperature Range: -20 - 450 short-term maximum temperature: peaks to +450° C exhaust gas temperature (peaks to +500° C), for proper use exhaust gas funnels are required and a sufficient supply of fresh air (approx. 50% based on the maximum specified temperature) Delivery Information Delivery, type of production: Order-related production Application Areas Areas of application: Automotive, Plant & Mechanical Engineering, Industry, Aerospace technology, Ventilation & air-conditioning, Sea & rail transport, Food & Pharma,...

Open the catalog to page 2

Master-Clip HT 450 | Article Master No.: 000324 Extended Article Number Article number Bending radius* Operating pressure Negative pressure All data refer to a medium and ambient temperature of +20°C. Specification of the bending radius related to the inside of the hose bend Subject to technical changes and colour deviations Delivery Variants Available in other lengths, other nominal diameters, with customer-specific customer-specific imprint. Possible Connection Elements Hose connector Sheet steel connector for extending, connecting and joining light to mediumweight hoses Hose Reducer,...

Open the catalog to page 3