Machine Specifications Overview

Capacity:
- Max swing: ø670 mm (26.3")
- Max turning diameter: ø450 mm (17.7")
- Max turning length varies by model: 760 mm (29.9") to 2020 mm (79.5")
- Bar capacity: ø77 mm (3")

Travel:
- X axis: 225+25 mm (8.8"+1")
- Z axis varies by model: 790 mm (31.1") to 2050 mm (80.7")

Spindle:
- Spindle speeds range: 3500 to 9100 rpm
- Chuck size: 254 mm (10")
- Spindle nose: A2-8
- Spindle motor power: 18.5 kW (24.8 HP)

Turret:
- Number of tool stations: 12
- Shank height for square tool: □25 mm (1")
- Shank diameter for boring bar: ø40 mm (1.5")

Feedrate:
- X axis rapid traverse: 5 M/min
- Z axis rapid traverse: 5 M/min

Feed Motors:
- X axis motor: 5 kW
- Z axis motor: 5 kW

Tailstock:
- Quill diameter: ø100 mm (3.9")
- Quill inside taper: M.T

Machine Size:
- Total machine weight varies by model
- Machine length varies by model
- Machine width: 1930 mm (76")
- Machine height varies by model
- Power requirement: 40 KVA
- Computer control: FANUC Oi-T

Standard Accessories:
- Metric disc, Manual tailstock, Buzzer, Heat exchanger, Full enclosed splash guard, 3 jaw open center chuck, Foot switch, Wide angle V-belt, VDI disc (specific to models)

Optional Accessories:
- Inch disc, Tool setter, Programmable Tailstock, Manual steady rest, Hydraulic steady rest, Alarm lamp, Air conditioner, Bar feeder, Auto door, Spindle air outer blow, High pressure pump, Chip conveyer, Chip bucket, Two speed gearbox, Collect chuck, Mist separator, Oil skimmer, H.T.D belt, Transformer, EWS Turret BMT-65