Printer Comparison

Product catalog summary

Overview: This document provides detailed specifications for MassPortal's range of desktop and production 3D printers, highlighting their customizable nature and advanced features.

Printer Models:

Desktop 3D Printers: MP400, MP600, MP1200
Production 3D Printers: MP20, MP30, MP40

Technology: All models utilize Fused Filament Fabrication (FFF) technology.

Specifications:

Build Volume: Ranges from 200 mm x 200 mm to 600 mm x 1000 mm depending on the model.
Nozzle: Standard 0.4 mm up to 300°C, with options for dual nozzles up to 475°C.
Build Chamber: Enclosed and ventilated, with some models featuring heated chambers.
Build Plate: Glass, capable of heating up to 120°C.
Dimensions and Weight: Vary by model, with shipping weights ranging from 30 kg to 110 kg.
Additional Features: Built-in filament dryers, remote monitoring with HD cameras, filament runout sensors, and continuous printing capabilities.

Performance:

Maximum Printhead Travel Speed: 250 mm/s
XYZ Accuracy: 6, 6, 5 microns
Ultimate Layer Resolution: 50 microns

Compliance and Compatibility:

Regulatory Compliance: CE, WEE
Supported File Formats: .stl, .obj, .3mf

Common Features: Automatic calibration, optional dual nozzle, WiFi and Ethernet connectivity, FabControl software, open material compatibility, and overheat protection.

Customization: Every printer can be built to order, allowing for tailored specifications to meet specific needs.

Catalog excerpts

Printer Specifications EVERY PRINTER CAN BE BUILT TO ORDER E-mail [email protected] MassPortal.com Document version: 03.05.2022. For more information about printers, please visit our website:

Open the catalog to page 1

Printer specifications Desktop 3D printers MP20 Technology: Fused Filament Fabrication (FFF) Build volume (d x h): 0200 mm x 200 mm Standard Nozzle: 0.4 mm up to 300°C Filament Dryer: Not Included Build chamber: Enclosed, ventilated Build plate: Glass up to 120°C Dimensions (w x d x h): 340mm x 370mm x 641mm 340mm x 470mm x 641mm with spool holder Technology: Fused Filament Fabrication (FFF) Build volume (d x h): 0300 mm x 300 mm Standard Nozzle: 0.4 mm up to 300°C Filament Dryer: Not Included Build chamber: Enclosed, ventilated Build plate: Glass up to 120°C Dimensions (w x d x h): 425mm x 470mm...

Open the catalog to page 2

Printer Comparison

Printer Comparison

Catalog excerpts

All MASS PORTAL catalogs and technical brochures