• Extrusion System: Single-nozzle bowden with all-metal hotend and feeder, capable of extrusion temperatures up to 300 °C. Included nozzle size is 0.4 mm.
• Build Chamber: Enclosed chamber with a build volume of 400 mm x 400 mm, featuring a round glass printbed that heats up to 120 °C.
• Printer Technology: Utilizes Fused Filament Fabrication (FFF) with a cylindrical build volume of 400 mm x 400 mm. The motion system includes precision linear guideways.
• Performance: Maximum printhead travel speed is 250 mm/s with XYZ accuracy of 6, 6, 5 microns and an ultimate layer resolution of 50 microns.
• Electronics: 32-bit electronics with open-source Repetier-Firmware.
• Connectivity: USB 2.0, Ethernet jacks, and Wi-Fi.
• Power Requirements: Maximum power consumption is 565 W.
• Regulatory Compliance: CE and WEEE certified.
• Safety Features: Includes air filtering with active carbon filters and overheating protection.
• Printer Size: Dimensions are 535 mm x 588 mm x 1100 mm, or 535 mm x 608 mm x 1100 mm with spool holder. Weight is 93 kg.
• Shipping Dimensions: 840 mm x 800 mm x 1200 mm with a shipping weight of 110 kg.
• Ambient Conditions: Operating temperature range is 15-35 °C with 10-90% relative humidity.

• Device Control and Management: Features a touch screen interface, automatic calibration, and status notifications.
• Supplied Software: Includes Slic3r for slicing, FabControl® for printing and drying profile management, and FabControl® Embedded for device control.
• Supported File Formats: 3D models in .stl, .obj, .3mf and print files in .gcode up to 150MB.

• Automation Ready: Yes, with software interfaces.
• Build Chamber Door: Made of polycarbonate with illumination.
• Air Filtration: Equipped with air and active carbon filters.
• Filament Sensor: Included for monitoring filament usage.

For more information on hotends, refer to the hotend specification sheets or contact a sales representative at [email protected].