19090-449 Winter Trousers breathable - wind- and waterproof - two-toned - MASCOT® ACCELERATE SAFE Main material/upper material • Breathable, wind and waterproof with taped seams. • Very durable. • Unique CLIMASCOT® insulation provides warmth without bulk. Lightweight, soft CLIMASCOT® insulation takes up almost no space when compressed. • Ergonomically shaped trouser legs are constructed to follow the body's natural movements. • Ruler pocket with Kevlar® reinforcement - particularly resistant to pointed and sharp objects. • The kneepad pockets of durable CORDURA® are adjustable so the kneepads have the optimal position on your knees. • Raised back piece provides support and extra protection against cold and wind. • Snow locks inside the leg to keep snow and dirt out. • Co-certified for use with MASCOT kneepad type SHORT or LONG, as the kneepad pocket is height-adjustable. Ripstop.Shrinkage max. 2%.According to EN ISO 20471, this product is certified to retain its properties with 50 domestic washes. Industrial care category C2 Lightweight Insulation OEKO-TEX® STANDARD 100 EN ISO 20471 - class 2 Hi-Vis Group Y EN 342 3/WP (1.7 clo) Fluorescent and with reflective tape. The fabric is highly durable, breathable, wind and waterproof. CLIMASCOT® Lightweight Insulation. Two-toned. Taped seams. Ergonomically formed trouser leg. Belt loops. Fly with zip. Front pockets. Back pockets with reinforcement and flaps. Hidden tool straps on both sides. Ruler pocket with Kevlar® reinforcement. Thigh pockets with flaps. Thigh pocket with lined phone pocket, magnet fastening and integrated ID card holder. Detachable ID card holder. Strong, elastic, detachable, adjustable braces. The waistband is higher at the back, to better protect against the cold. Waist with elasticated sides. Adjustable kneepad pockets in durable CORDURA® (500 D). Snow flap on the inside of leg. Zip with storm flap on inside of lower legs. We recommend 00418-100, 00718-100, 50451-916 and 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404. You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product. The product is certified with a maximum logo area of 0,1900m2. This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product's hi-vis class according to EN ISO 20471, the instructions on logo size must be observed. Logo placement: • Workwear logo. Left front pocket. Max 11x6 cm/4.3x2.3 inc

Powered by TCPDF (www.tcpdf.org) Workwear logo. Right front pocket. Max 11x6 cm/4.3x2.3 inches Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3x1.5 inches Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3x1.5 inches Workwear logo stretch. Horizontal on right thigh. Max 9X6 cm/3.5x2.3 inches Workwear logo stretch. Horizontal on left thigh. Max 9X6 cm/3.5x2.3 inches Workwear logo. Special placement. Contact to discus