19279-510
2Pages

19279-510 Pants with kneepad pockets ULTIMATE STRETCH - water-repellent - two-toned - suitable for Industrial wash MASCOT® ACCELERATE SAFE ULTIMATE STRETCH.Shrinkage max. 2%.The product is Ergonomically shaped trouser legs are constructed to certified to retain it qualities with 50 domestic washes or ≥ follow the body's natural movements. Ruler pocket with Kevlar® reinforcement - particularly Industrial care category B1 resistant to pointed and sharp objects. Prepared for holster pockets 19450-126, which are attached with buttons. Effective ventilation to the leg via the zip on the back of the thigh. The kneepad pockets of durable CORDURA® are adjustable so the kneepads have the optimal position on your knees. Co-certified for use with MASCOT kneepad type SHORT or LONG, as the kneepad pocket is height-adjustable. The product tolerates industrial washing. Technical info Logo As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Fluorescent and with reflective tapes. The polyester is made Remember to check the washing instructions for the chosen from recycled resources. Has a water-repellent finish. Two- transfer before washing the product. toned. Lightweight. Ultimate stretch fabric with extra low weight and high wear resistance. Double stitched seams on leg and crotch. Hidden stud fastening. Ergonomically formed trouser leg. Belt loops. Fly with zip. Front pockets. Back pockets with reinforcement. Hidden tool strap on right side. Ruler pocket with Kevlar® reinforcement. Pockets with flaps on thighs. Adjustable kneepad pockets in very durable CORDURA® (1000 D). Thigh pocket with lined telephone pocket, hidden press stud fastening and integrated ID card holder. Detachable ID card holder. Vertical zip to allow for ventilation on back thigh. With print effects. Prepared for The product is certified with maximum (82+90 cm) 0,0300 m² (76 cm) 0,0400m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed. Logo

holster pockets 19450-126, which are attached with buttons. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitches. We recommend 00718-100, 00418-100, 50454-916 & 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.