01.1 ROBOT SYSTEMS The crème de la crème of HERMLE's automation solutions are its robot systems. Individually configurable and highly flexible, whether for pallet handling, changing workpieces from dies or directly from rack storage. Gripper change from single to double gripper for even more flexibility. A wide range of magazine configurations to suit individual customer requirements. The robot systems can be adapted to all HERMLE machining centres and they are available in different versions, From the RS 05-2 robot system for small pallets and components to the RS 3 system with a transport capacity...

ONE SYSTEM. INFINITE POSSIBILITIES. Available for: C 12, C 22, C 32, C 42, C 250 and C 400 Transport weight: up to 60 kg Available for: C 22, C 32, C 42, C 52, C 250, C 400 and C 650 Transport weight: up to 210 kg RS Linear robot system VARIABLE FOR MAXIMUM PRODUCTIVITY Available for: C 42, C 52, C 400 and C 650 Transport weight: up to 420 kg Available for: C 22, C 32, C 42, C 52, C 250, C 400 and C 650 Transport weight: up to 420 kg ADVANTAGES - Individual design for economic production of workpieces and parts families - Pallet handling - Short loading and unloading cycles - Pre-programmed sequence...

01.2 PALLET CHANGERS Our pallet changer is setting new standards for parallel setup in our highly dynamic machining centres. A further increase in productivity allows for more adaptable storage systems. Machining centres can be set up via pallet storage for production-oriented machine runs with minimum operator interference/without operator interference or for customer-specific runs using a wide range of parts. Pallet changer PW 150 8-fold rack storage Optionally rotating setup station

COMPACT WITH LARGE RACK STORAGE COMPACT WITH LARGE RACK STORAGE Available for: C 12 Transport weight: up to 100 kg Available for: C 22 Transport weight: up to 150 kg Available for: C 42 / (MT) Transport weight: up to 850 kg Available for: C 52 / (MT) Transport weight: up to 2000 kg ADVANTAGES - Completely free access to the machining centre* - Quick and easy installation - Complete transport (no disassembly) Pallet changer PW 3000 VARIABLE FOR LARGEST PARTS Available for: C 52 / (MT) and C 62 / (MT) Transport weight: up to 3000 kg - Setup station optionally rotatable - Pallet storage unit - HACS...

01.3 HANDLING SYSTEMS For efficient production. Pallets in a wide variety of shapes, sizes and weights can be handled automatically by handling systems to achieve advantages in cost and time. HS flex with two pallet storage modules and a setup station, adapted to a C 42 machining centre.

Handling system HS flexHandling system HS flex heavy FLEXIBLE AND COMPACT FLEXIBLE AND COMPACT Handling system HS flex hybrid FLEXIBLE AND CONFIGURABLE - Automation solution for high-capacity pallet storage - Optimised, operator-friendly access to the machining centre - Easy and quick installation and commissioning - HACS management software with intuitive operability

Why automation? Humans have always been very inventive when it comes to making work easier, avoiding hard and monotonous activities and improving productivity. Now the main aims are to increase production times and decrease idle- and downtimes. The better this can be achieved, the lower the machine-hour rate and the lower the personnel costs, meaning altogether lower capital commitment. Especially in times of staff shortages in the high-qualification areas, automation provides an alternative to manned triple-shift operations. Average machine utilization [individual production] Average machine...

03 HACS - Intelligent order management The HERMLE Automation Control System HACS is an easy-to-operate order management system for your HERMLE machining centres. The intuitively operable software allows for intelligent order processing and assists the operator in his daily tasks. The transparent representation of the orders and required operator actions reduces organisational downtimes and maximises system productivity. - Forecast of runtime and tool usage - Intuitive allocation of NC programs and zero points - Order definition for piece counting, order prioritisation and planning - Dynamic sequence...

04.1 HIGH-PERFORMANCE-LINE With its HIGH-PERFORMANCE-LINE, HERMLE has been supplying high-tech sectors for the international market with highly precise and high-performance machining centres for many years now. Whether as stand-alone machine, automated system or connected manufacturing facility, our machines are unequalled in their field.

04.2 PERFORMANCE-LINE HERMLE's PERFORMANCE-LINE machining centres have all the high-precision capabilities of the HIGH-PERFORMANCE-LINE, and the only concessions they make concern the range of equipment.

05 Worldwide You can find our sales and service network in more than 50 countries on 6 continents with competent on-site service. That is one of our success factors for long-term customer relationships based on partnership. Our motto: Direct sales and local service – nothing else will do! HERMLE works for its customers worldwide to provide direct, on-site consultation, sales, training and expert service. HERMLE AG headquarter HERMLE subsidiaries / representatives Maschinenfabrik Berthold HERMLE AG Industriestrasse 8-12 D-78559 Gosheim Phone +49 (0)7426 95 - 0 [email protected] | www.hermle.de Subject...