The Smart Intralogistics Solution from the Modular Construction Kit

Contents Roller Conveyor Roller Conveyor – Overview and Selection4 Roller Conveyor RBF 2000 – Lines Line, Motor Driven Roller Line, Gearmotor Line, Gravity Roller Conveyor RBF 2000 – Curves 8 10 11 Curve 45°/90°, Motor Driven Roller Roller Conveyor RBF 2000 – Functional Lines Roller Conveyor RBF 2000 – Function Modules Roller Conveyor RBF 2000 – Accessories Alignment Roller Conveyor 13 Infeeds/Outfeeds14 Multi-Transfer Module 90° Transfer Module Stands18 Side Rails 20 Other Accessories 21 Roller Conv

Roller Conveyors

Roller Conveyors Roller pitch Pitch based on the product length (LP) Minimum 3 rollers under product Other pitches available on request Box 400 x 600 mm lengthwise, support surface lengthwise 540 mm. Minimum: 540/3 = 180 mm => P 175 mm RBF 2000 - From Module to System The RBF 2000 is a complete roller conveyor system for intralogistics: Lines with motor driven roller, gearmotors or gravity, curves, roller conveyors for alignment, infeeds/outfeeds as well as 90° transfer and multi-transfer modules can be flexibly combined. This allows standard modules to be used to create customised solutions...

The roller conveyors feature two conveyor frame profiles made of anodised aluminium profiles, which are perforated throughout. The upper section has hexagonal holes for roller mounting via a springloaded axle, while the lower section has round holes for crossbeams and other accessories. Power is transmitted from roller to roller via poly-V/V-ribbed belts. The motor driven rollers are powered by brushless 24 V DC motors with planetary gear – powerful, robust and energy-efficient. The conveyors are designed to accommodate the container types typically used in internal material flows and can also...

» The modular system for intralogistics. « Modular. Decentralised. Tidy. Cross section The RBF 2000 is a modular roller conveyor system for containers, cartons and trays up to 55 kg. Straight lines, curves, conveyors for alignment, infeeds/outfeeds, as well as 90° and multi-transfer modules can be combined to create customised solutions for intralogistics/production logistics – controlled decentrally or with a higher-level PLC. With anodised aluminium profiles and concealed cable routing within the conveyor frame profile, the RBF 2000 is sturdy, durable and neat. Zone-operated 24V motor driven...

Benefits of the RBF 2000 ■ Standardised modules for implementing even complex route layouts ■ Durable, low-maintenance design for reliable continuous operation ■ High-performance, energy-efficient drives with clever control options ■ Well-planned design for a simple and tidy electrical installation ■ Flexibly expandable and adaptable to new requirements cartons, boxes, containers e.g. plastic containers, storage bins up to 6,000 mm (total length unlimited by connecting the conveyors) Conveyor width B usable width + 84 mm (conveyor frame profile incl. closure strip) Load* up to 55 kg per conveyed...

The motor driven roller conveyor for buffering has one motor driven roller per zone, which drives several rollers. By means of a corresponding controller and sensors, the products can be transported individually and with zero-pressure accumulation. Item no. Pitch P Versions B61.03.010 75 mm standard version; also for accommodating 90° transfer at T-profile B61.03.013 75 mm optimised for flush 90° transfer at the end of the line (L or T-profile) B61.03.014 75 mm optimised for one flush 90° transfer at each end of the line (U or S-profile)

RBF 2000Line, motor driven roller Depending on the length, product and speed, the motor driven roller conveyor has at least one or more motor driven rollers, each of which drives several rollers.

The geared roller conveyor is used for cost-effective transport over longer, continuous distances. A gearmotor, positioned approximately in the centre, drives two rollers via a pulley, which in turn drive next rollers.

RBF 2000Line, gravity Gravity roller conveyors do not have a motor; the products are accelerated by gravity or manually. Brake rollers are available upon request.

RBF 200045° or 90° curve, motor driven roller Depending on the length, product and speed, the motor driven roller conveyor has at least one or more motor driven rollers, each of which drives several rollers. Due to the conical rollers (steel rollers with conical plastic elements), the products retain their alignment even when changing direction. The usable width of the downstream roller conveyor must always be at least as wide as that of the curve. Item no. conveying Item no. conveying angle 45° angle 90°

RBF 2000Alignment roller conveyor, motor driven roller The alignment roller conveyor is driven by one or more motor driven rollers. It moves the products not only in the conveying direction, but also perpendicular to it towards the side rail by tilting the rollers. This is used for alignment in front of functional units, labelling stations, etc., or to reduce the usable width of the roller conveyor along its route. Length Width Optimised for products Lateral movement of the product [mm] Technical data

45° infeed/outfeed, motor driven roller The 45° infeed/outfeed with staggered rollers allows for the merging or branching of product flows. As an infeed, it directly merges two roller conveyors; as an outfeed, it branches the product flow in combination with a multi-transfer module. Technical data

Multi-transfer module The multi-transfer module features rows of omnidirectional rollers arranged perpendicular to each other. It is positioned as a separate zone within a zero-pressure accumulation line. This allows products to be discharged in two different ways: 1) At a 45° angle while maintaining orientation, and in a „flow“ configuration 2) At a 90° angle, where the products must be briefly stopped and their orientation changed Length L [mm] Usable width [mm]