D28 Round Tube System
12Pages

TECHNOLOGY GROUP D28 Round Tube System °Qy GROUP

D28 Round Tube System » Economical design and effortless handling. « The D28 round tube system was developed for lean production purposes to provide more streamlined and economical use of production resources. Almost any design for individual workshop and assembly equipment can be built using just two profile cross sections and ten connectors. Whether for supply trolleys, shelves, racks or extensions for workstations, the easy-to-use D28 round tube system means that a single person can put together brand new structures or extensions with little effort. Neither profile machining nor special...

Benefits of the D28 Round Tube System Parallel Connection S imple, fast and economical design Q uick modification of existing applications E asy construction requires only one person D urable and sturdy connection technology E asy connection to mk Series 40 profiles with no need for profile machining E mploy mk tension plugs for an additional connection option without obstructing edges F ully compatible with round tube profiles with a diameter of 28 mm Cross Connection C hoose the degree of assembly (components, assemblies, complete solutions) P articularly light profile at 0.6 kg/m

Series D28 Profiles Basic Profiles Series D28 round tube profiles have a diameter of 28 mm and a centre bore channel of 7.4 mm. They are compatible with mk Series 40 profiles and can be connected with an adapter or tension plug. They can be used for constructing equipment such as light-duty frames, supply trolleys, shelves or extensions for workstations. The optimised contour provides the system with excellent moments of inertia and section moduli. Material: anodised aluminium Fastening example Stock length M8 thread possible Profile mk 2280, Al Series 40 tension plug, galv. steel,...

Connecting Elements 90° Angle Fasteners The T-connector D28 consists of two pre-assembled half shells and is attached using a screw-clamp connection on the longitudinal key of the mk 2279 profile and face of the mk 2279/2280 profiles. The corner fastener D28 consists of two pre-assembled half shells and is attached using a screw-clamp connection on the face of the mk 2279/2280 profiles. Material: die-cast aluminium Fastening example Profile mk 2279, Al Profile mk 2280, Al Corner fastener D28, K112280003 Connecting Elements

Cross Connector The X cross connector D28 provides a stable connection between two mk 2279 round tube profiles. The connector is attached to the longitudinal keys of the profiles using a screw-clamp connection at a 90° angle. Material: die-cast aluminium Fastening example Profile mk 2279, Al X Cross connector D28, K112280006 Connecting Elements

Connecting Elements Angle Fasteners The 45° connector D28 consists of two pre-assembled half shells and is attached using a screw-clamp connection on the longitudinal key of the mk 2279 profile and face of the mk 2279/2280 profiles. The angle brace D28 stabilises the corner joints of the mk 2279 profile. The connector also consists of two pre-assembled half shells and is attached using a screw-clamp connection on the longitudinal keys of the profiles. Series 40 corner joints can also be stabilised using the adapter D28/40. Material: die-cast aluminium Fastening example Profile mk 2279, Al...

Ball Joint Connectors The ball joint connectors are suitable for variable connections between two Series D28 round tube profiles. Each consists of two pre-assembled half shells. Angles up to 90° can be fixed by tightening the screws. Ball joint 1 D28 is attached using a screw-clamp connection on the face of the profiles. Ball joint 2 D28 consists of two pre-assembled half shells and is attached using a screw-clamp connection on the longitudinal key of the mk 2279 profile and face of the mk 2279/2280 profiles. Material: die-cast aluminium Fastening example Ball joint 2 D28, K112280010 Ball...

Connecting Elements Parallel Connectors The parallel connector shown here provides a stable connection between two Series D28 round tube profiles that run parallel to each other. They consist of two pre-assembled half shells. Parallel connector 1 D28 is attached using a screwclamp connection on the longitudinal key of the mk 2279 profile. Parallel connector 2 D28 is attached using a screw-clamp connection on the longitudinal key of the mk 2279 profile and around the mk 2280 profile. Material: die-cast aluminium Fastening example Parallel connector 1 D28, K112280007 Profile mk 2279, Al...

Accessories Adapter for Series 40 Profiles The adapter D28/40 enables a Series 40 profile to be used with Series D28 connectors. The adapter plate is fixed in the slot or attached to the face of a Series 40 profile, which allows a Series 28 screw-clamp connection to be attached. Material: die-cast aluminium End Cap The mk 2582 end cap has a diameter of 28 mm and closes the front side of the mk 2279 and mk 2280 profiles. It protects against sharp-edged cutting surfaces and provides for a clean closure and high-quality look. The end cap is fastened to the profile simply by placing it on the...

Maschinenbau Kitz GmbH Headquarters of the mk Technology Group Amperestrasse 18 53844 Troisdorf, Germany Germany Tel. +49 228 4598-0 info@mk-group.com