T-SYSTEM series pumps and motors with support bearing

Product catalog summary

Specifications:
The document provides detailed specifications for pump models ALP2, ALM2, GHP2, and GHM2. Key details include displacement, flow rate at 1500 rpm, maximum pressure, maximum speed, and dimensions. The pumps feature cast iron flanges and either aluminium or cast iron covers.

Procedures:
Guidelines for ordering and specifying options such as rotation type, shaft size, ports, seals, and drainage are included. The document references specific codes and standards like SAE J1926/1 (ISO 11926-1) for threaded ports with O-ring seals.

Standards:
The document complies with international standards for flanges and ports, including SAE J744c and SAE J1926/1 (ISO 11926-1). It specifies thread depths for standard and drain ports.

Recommendations:
For additional information, contacting the Sales or Technical Departments is recommended. It is also advised to specify if a motor type different from the standard is required.

Accessories:
Standard accessories listed include woodruff keys, hexagonal nuts, and washers, with specific codes provided for these components.

Performance Data:
The document includes load curves for standard ball bearings under radial load, illustrating performance at various rpm levels.

Catalog excerpts

T-SYSTEM series pumps and motors with support bearing-2

Tipo Type I omit A A3 BK1 Solo per opzione C2 / only C2 option Solo per motore A e BK1 / only for A and BK1 motor types with O-ring seal in truncated housing Drain port are machined in compliance with threaded port con tenuta O-Ring. Profondità utile 12.7 mm / specifica SAE J 1926/1 (ISO 11926-1) relativa a porte filettate Le porte di drenaggio sono lavorate secondo la Solo per rotazione R / only for R rotation to be specified if different from standard motor type campi da specificare se diversi dallo standard "tipo motore" / / Please contact out Sales or Technical Depts for further details Per...

Open the catalog to page 2

T-SYSTEM series pumps and motors with support bearing-3

ALP2-T Parti accessorie a corredo della pompa standard: linguetta a disco (codice 522057), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M6 profondita utile 13 mm, filetti M8 profondita utile 17 mm. Disponibile su richiesta albero conico con linguetta a disco di spessore 3.2 mm (“T3”). Flangia in ghisa - coperchio in alluminio Accessories supplied with the standard pump: woodruff key (code 522054), M10x1 exagonal nut (code 523015), washer (code 523004). Standard ports: M6 threads depth 13mm, M8 threads depth 17 mm. The tapered shaft is also available...

Open the catalog to page 3

T-SYSTEM series pumps and motors with support bearing-4

ALP2A - T Parti accessorie a corredo della pompa standard: linguetta (codice 522067). Monta flangia 82-2 (A) secondo norma SAE J744c. Le porte standard “D” e “d” sono lavorate secondo la specifica SAE J 1926/1 (ISO 11926-1) relativa a porte filettate con tenuta O-ring. Flangia in ghisa - coperchio in alluminio Accessories supplied with the standard pump: key (code 522067). Mounting flange 82-2 (A) in compliance with SAE J744c. “D” and “d" standard ports are machined in compliance with threaded port with O-ring seal in truncated housing SAE J 1926/1 (ISO 11926-1). Cast iron flange - aluminium...

Open the catalog to page 4

T-SYSTEM series pumps and motors with support bearing-5

ALP2BK1 - T Parti accessorie a corredo della pompa standard: linguetta a disco(codice 522055), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M6 profondita utile 13 mm. Flangia in ghisa - coperchio in alluminio Accessories supplied with the standard pump: Woodruff key (code 522055), M12x1.5 exagonal nut (code 523016), washer (code 523005). Standard ports: M6 threads depth 13 mm. Cast iron flange - aluminium cover MANDATA OUTLET ASPIR AZIONE INLET TIPO TYPE

Open the catalog to page 5

T-SYSTEM series pumps and motors with support bearing-6

ALM2-T Parti accessorie a corredo della pompa standard: linguetta a disco(codice 522057), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M8 profondita utile 17 mm. Drenaggio G1/4 profondita utile 12 mm. Disponibile su richiesta albero conico con linguetta a disco di spessore 3.2 mm (“T3”). Flangia in ghisa - coperchio in alluminio Accessories supplied with the standard pump: Woodruff key (code 522057), M12x1.5 exagonal nut (code 523016), washer (code 523005). Standard ports: M8 threads depth 17 mm. G1/4 drain port thread depth 12 mm. The tapered...

Open the catalog to page 6

T-SYSTEM series pumps and motors with support bearing-7

ALM2A- T Parti accessorie a corredo della pompa standard: linguetta (codice 522067). Monta flangia 82-2 (A) secondo norma SAE J 744c. Le porte standard sono lavorate secondo la specifica SAE J 1926/1 (ISO 11926-1) relativa a porte filettate con tenuta O-ring. Filetto 1/4 -28 UNF profondita utile 16 mm. Drenaggio G1/4 profondita utile 12 mm. Flangia in ghisa - coperchio in alluminio Accessories supplied with the standard pump: key (code 522067). Mounting flange 82-2 (A) in compliance with SAE J 744c. Standard ports are machined in compliance with threaded port with O-ring seal in truncated housing SAE...

Open the catalog to page 7

T-SYSTEM series pumps and motors with support bearing-8

ALM2BK1-T Parti accessorie a corredo della pompa standard: linguetta a disco(codice 522055), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M6 profondita utile 13 mm. Drenaggio G1/4 profondita utile 12 mm. Flangia in ghisa - coperchio in alluminio Accessories supplied with the standard pump: woodruff key (code 522055), M12x1.5 exagonal nut (code 523016), Washer (code 523005). Standard ports: M6 threads depth 13 mm. G1/4 drain port thread depth 12 mm. Cast iron flange - aluminium cover TIPO TYPE

Open the catalog to page 8

T-SYSTEM series pumps and motors with support bearing-9

GHP2-T Parti accessorie a corredo della pompa standard: linguetta a disco (codice 522057), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M6 profondita utile 13 mm, filetti M8 profondita utile 17 mm. Disponibile su richiesta albero conico con linguetta a disco di spessore 3.2 mm (“T3”). Flangia in ghisa - coperchio in ghisa Accessories supplied with the standard pump: woodruff key (code 522054), M10x1 exagonal nut (code 523015), washer (code 523004). Standard ports: M6 threads depth 13mm, M8 threads depth 17 mm. The tapered shaft is also available...

Open the catalog to page 9

T-SYSTEM series pumps and motors with support bearing-10

GHP2A- T Parti accessorie a corredo della pompa standard: linguetta (codice 522067). Monta flangia 82-2 (A) secondo norma SAE J744c. Le porte standard “D” e “d” sono lavorate secondo la specifica SAE J 1926/1 (ISO 11926-1) relativa a porte filettate con tenuta O-ring. Flangia in ghisa - coperchio in ghisa Accessories supplied with the standard pump: key (code 522067). Mounting flange 82-2 (A) in compliance with SAE J744c. “D” and “d” standard ports are machined in compliance with threaded port with O-ring seal in truncated housing SAE J 1926/1 (ISO 11926-1). Cast iron flange - cast iron cover

Open the catalog to page 10

T-SYSTEM series pumps and motors with support bearing-11

GHP2BK1-T Parti accessorie a corredo della pompa standard: linguetta a disco(codice 522055), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M6 profondita utile 13 mm. Flangia in ghisa - coperchio in ghisa Accessories supplied with the standard pump: Woodruff key (code 522055), M12x1.5 exagonal nut (code 523016), washer (code 523005). Standard ports: M6 threads depth 13 mm. Cast iron flange - cast iron cover MANDATA OUTLET ASPIR AZI0NE INLET TIPO TYPE

Open the catalog to page 11

T-SYSTEM series pumps and motors with support bearing-12

GHM2-T Parti accessorie a corredo della pompa standard: linguetta a disco(codice 522057), dado M12x1.5 (codice 523016), rosetta elastica spaccata (codice 523005). Porte standard: filetti M8 profondita utile 17 mm. Disponibile su richiesta albero conico con linguetta a disco di spessore 3.2 mm (“T3”). Drenaggio G1/4 profondita utile 12 mm. Flangia in ghisa - coperchio in ghisa Accessories supplied with the standard pump: Woodruff key (code 522057), M12x1.5 exagonal nut (code 523016), washer (code 523005). Standard ports: M8 threads depth 17 mm. The tapered shaft is also available with 3.2 mm key...

Open the catalog to page 12