Technical Specifications and Dimensions

The document provides detailed mechanical specifications and dimensions for a component featuring threaded ports and shafts. Key dimensions include diameters, angles (notably 45°), and tolerances (e.g., -0.025/+0, -0.06/-0.01). Thread types and depths are specified, with standard ports using M6 threads with a 12 mm useful depth, and optional "GAS" ports using G3/8 threads, also with 12 mm depth, machined on both sides of the body.

Port and Shaft Details

The component includes "GAS" ports and a "G" shaft, with sectional views labeled A-A and B-B. The ports are identified as inlet (aspirazione) and outlet (mandata), indicating fluid flow directions.

Performance Parameters

Summary of Critical Information

• Threading: Standard M6 threads with 12 mm depth; optional G3/8 "GAS" threads on both sides.
• Flow and Pressure: Flow rates range from 1.1 to 11.9 litres/min at 1500 rpm depending on displacement; maximum pressures vary from 160 to 270 bar.
• Speed Limits: Maximum rotational speeds decrease with increasing displacement, from 6000 rpm down to 2100 rpm.
• Dimensions: Specific dimensions P1, P2, P3, L, and M are provided for each type, critical for installation and compatibility.

This document is essential for engineers and technicians involved in selecting and installing these components, ensuring correct thread compatibility, pressure ratings, and operational limits.