Test Equipment Martindale • Metrohm® • Drummond Martindale Catalogue cover 2014 blue.indd 3

PATREG PATUSBADAPT 17th Edition Testing Voltage Indication The first ever ring main socket tester; The first safety insulation tester; The first self proving non-contact voltage indicator; The first low cost fuse finder; The first non-trip, no battery, no test button loop tester displaying PE, PN, PFC & PSC; ◆ The first advanced socket tester, as defined by the Health and Safety Executive; ◆ The smallest and lightest handheld PAT tester. Multimeters & Clamp meters Fuse Finders Cable Detectors HVAC Environmental and FM Thermometry Specialist Testers Test Leads and Accessories Measurement Categories...

New Products CM84 1000A AC/DC clamp meter CM82 1000A AC clamp meter page 44 CMi210 Insulation clamp meter fully specified clamp meter with insulation test page 42 VT4 Dual sensitivity non-contact voltage tester with built-in torch page 17 VT7 Single pole voltage tester page 14 New Products CM87 True RMS clamp meter page 45 RT80 Optical Tachometer page 54 LOK10 MCB locking device page 20 DH85 Hygro-moisture meter page 54 LOK11 MCB locking device page 20 LOK15 MCB locking device page 20 PD710 700V DC proving device page 19 PM85 Differential manometer page 54

General Purpose Electrical Testing Electrical Tester ET4 A compact electrical tester that measures voltage, resistance and current. It will also measure frequency, continuity and will take simultaneous measurement of current/voltage and frequency/voltage. This electrical tester can be used as a non-contact voltage indicator and has auto ranging, display hold and auto power off functions. One of the forks has a forward facing LED light to illuminate the area in the front. The ET4 is supplied with TL17 test leads, a soft carry case, 9V battery and manual. Insulation: 0.200MΩ-1000MΩ at 500V in 4...

E-Ze Test Non-trip Earth Loop Impedance Tester Nominal voltage rating: 220-240V Supply voltage: 240 Volts AC, 50/60Hz Voltage range for wiring error detection: 30-275V Open loop indication: If open PE or PN Loop is detected, no Impedance Measurement takes place Voltage range for impedance Measurement: 198-264V Frequency: 50Hz PE loop impedance ranges: 0-8.99Ω, 9.0-89.9Ω, 90-899Ω, 900-1699Ω, 1700-3000Ω PE loop impedance accuracy: 0-8.99Ω ± 4% ± 0.05Ω* 9.0-89.9Ω ± 5% ± 0.5Ω* 90-899Ω ± 5% ± 5Ω* 900-1699Ω ± 5% ± 30Ω* 1700-3000Ω indicative PFC & PSC test PN loop impedance ranges: 0-8.99Ω, 9.0-89.9Ω,...

Earth Tester E1612 The Metrohm E1612 is a handheld 4 pole Earth Resistance tester for accurate measurement of earth resistance and soil resistivity. The tester, including batteries, weighs less than 1.5kg making it ideal for the mobile approach required when performing earth testing. This microprocessor controlled unit benefits from advanced safety features and displays the test results on a large LCD screen. The E1612 is supplied as a kit and includes batteries, 4 earth spikes with connecting cables and a manual. The manual includes simple illustrated instructions of how to carry out earth testing...

Phase Rotation Voltage Indication Phase Rotation & Continuity Indicator Quickly and simply prove the presence of all three live phases (or identify which are faulty) and show the sequence of phase rotation when all three phases are confirmed as present. The PC15250 gives a fast, effective, battery free method of identifying unmarked cables and ensures that 3-phase outlets and machines are wired correctly. The retractable GS38 probe shrouds give a choice between long exposed tips, for reaching difficult to access contacts, and shorter tips for increased safety. For use on systems from 50V to 600V...

Voltage Indication Voltage Indication Safety Voltage Indicator without Fuse VI13800 Voltage range: 50-600V AC/DC The VI-13800 voltage indicator is identical to the industry standard VI-13700/2 except that it does not have a fuse. It complies with BS EN61243-3 2010 which came into force in May 2013. This standard prohibits the use of fuses in 2 pole voltage indicators so the new model has the fuse replaced by a high wattage resistor in the probe that will limit the current in the event of damage to the cable. Maximum working voltage: 500VAC, 750DC LED Indication: +/-50, 100, 200, 400V Polarity...

Voltage Indication Voltage Indication Single Pole Voltage Tester A single pole contact voltage indicator which detects AC voltages of 50V-600V with bright LED indication. This ergonomically designed voltage tester has a selftest function and is IP54 rated, for indoor and outdoor use. The tester is of durable construction making it suitable for both industrial and domestic applications. This unit can be used when wearing protective gloves and gauntlets. Potentially unsafe direct contact with a finger is not required. Voltage range: 12-690V AC/DC Frequency range DC: 16-400Hz Audible and visual...

Voltage Indication Voltage Indication Non-contact Voltage Indicator This is suitable for detecting 100V to 600V AC without requiring physical contact with the conductor. The presence of any voltage between 100V and 600V AC will generate an audible tone, together with a red visual indication. The integral self test activates the sensor in the tip of the tester at 50Hz as well as checking the battery and LED. The entire circuit, not just the indicator LED, is therefore tested. This proves that the unit is fully functional and avoids the need for a separate proving unit. The only non-contact detectors...

Voltage Indication Voltage Indication Proving Devices Martindale is the market leader in proving devices with a product for every need. Devices capable of indicating to 690V should be proved at a nominal 700V (PD690 or PD700). Safe electrical working requires the use of a voltage indicator that has been proved with a suitable proving device before and after use to ensure the instrument is working correctly. Martindale offer a range of compact, portable devices for proving two pole voltage indicators and multimeters with voltage detection ranges up to 700V. The PD430 and PD700 feature an initial...