TEK600 cable & pipe detector SPECIFICATIONS Indicators: audible tone and visual indication. Detection Depth: 0 - 25mm. Operating Temperature: -5 to 40°C. Case: robust ABS. Weight: 190gms. Dimensions: 150 x 64 x 30mm. Requires a MN1604 alkaline battery. Reliably locates live or dead cables through a variety of building aggregates and sub-surfaces. This unit uses both visual indication and an audible tone to pin point cables at a depth of up to 25mm* with a high degree of accuracy. It can even locate cables in close proximity to ferrous and non ferrous metal frameworks - an application not previously available with conventional units. Headphones are supplied for use where background noise is excessive to increase the real world sensitivity of the unit. * Depth of detection may vary dependant on cable type. Due to policy of continuous development, Martindale Electric reserves the right to alter equipment specification and description outlined in this document without prior notice. No part of this document shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract. © Martindale Electric Co. Ltd. 2005 Martindale Electric Company Ltd. Metrohm House, Penfold Trading Estate, Imperial Way, Watford, WD24 4YY. Tel: 01923 441717 Fax: 01923 446900 E-mail: [email protected] Web site: http://www.martindale-electric.co.uk