Martindale DC50 Borescope
1Pages

5. WARRANTY AND LIMITATION OF LIABILITY This Martindale product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is 2 years and begins on the date of receipt by the end user. This warranty extends only to the original buyer or enduser customer, and does not apply to fuses, disposable batteries, test leads or to any product which, in Martindale’s opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation, handling or storage. the validity or enforceability of any other provision or other part of that provision. Nothing in this statement reduces your statutory rights. Martindale authorised re-sellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Martindale. Martindale’s warranty obligation is limited, at Martindale’s option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to Martindale within the warranty period. This warranty is the buyer’s sole and exclusive remedy and is in lieu of all other warranties, expressed or implied, including but not limited to any implied warranty of merchantability or tness for a particular purpose. Martindale shall not be liable for any special, indirect, incidental or consequential damages or losses, including loss of data, arising from any cause or theory. Since some jurisdictions do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any part of any provision of this warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect 6 Check out what else you can get from Martindale: 17th Edition Testers Accessories Calibration Equipment Continuity Testers Electricians’ Kits Environmental Products Full Calibration & Repair Service Fuse Finders Digital Clamp Meters Digital Multimeters Labels Microwave Leakage Detectors Motor Maintenance Equipment Multifunction Testers Non-trip Loop Testers Pat Testers & Accessories Phase Rotation Testers Proving Units Socket Testers Thermometers & Probes Test Leads Voltage Indicators Specialist Metrohm Testers (4 & 5kV) Specialist Drummond Testers Power supply: 4 x1.5V AA battery Current consumption: 400mA max Monitor: TFT 89mm (3.5”) Resolution: 320 x 240 pixels Camera lighting: 2 x white LEDs Field of view: 54° Depth of eld: 30-60mm Operating temperature: 0 to +45°C Operating humidity: 15-85% RH Storage temperature: -10 to +50°C Main device dimensions: 90(W) x 205(H) x 131(D) mm Weight: 430g approx Gooseneck camera Length: 880mm approx Diameter: 9.8mm Minimum bend radius: 45mm Martindale Electric Company Limited Metrohm House, Penfold Trading Estate, Imperial Way, Watford WD24 4YY, UK Tel: +44(0)1923 441717 Fax: +44 (0)1923 446900 E-mail: sales@martindale-electric.co.uk Website: www.martindale-electric.co.uk © 2012 Martindale Electric Company Ltd. Registered in England No. 3387451. E. & O.E. Document Rev1 LITDC50