SpeciÀcation CD1000 Cable Detector SpeciÀcation CD1000 Cable Detector Power Transmitter: single 9V IEC 6LR61 battery Receiver: 6 x 1.5V AAA, IEC LR03 batteries Current consumption Transmitter: 31mA approx minimum 115mA approx maximum Receiver: 32mA approx minimum 89mA approx maximum Auto off time: 10 minutes approx (receiver only) Dimensions Transmitter: 190 x 89 x 42.5mm Receiver: 241.5 x 78 x 38.5mm ELECTRICAL SPECIFICATIONS Transmitter: Output carrier signal frequency: 125 kHz Voltmeter function: Range: 12V to 400V DC & AC rms (50Hz to 60Hz) Accuracy: ± 2.5% Maximum input voltage 400V DC or AC rms Receiver: Tracking Depth Weight Transmitter: 360g approx (batteries not included) 420g approx (batteries included) Receiver: 280g approx (batteries not included) 350g approx (batteries included) Includes: bag, TL47 test leads (with crocodile clips), earthing rod, 9V alkaline battery, 1.5V alkaline battery x 6 and instructions. Cable locating mode Maximum tracking depth Single pole Dual pole Single loop line GENERAL SPECIFICATIONS Temperature & Humidity Operating: 0°C to40°C max 80% R.H. (non condensing) Storage: -20°C to 60°C max 80% R.H. (non condensing) Altitude: up to 2000m Transmitter: Conforms to BS EN61010-1 CAT III 300V Class II Double Insulation Pollution degree: 2 Receiver: Conforms to BS EN 61010-1 CAT III 600V Class II Double Insulation Pollution degree: 2 Test leads supplied conform to BS EN61010-031 CAT III 1000V, 10A EMC: Conforms to BS EN61326