Catalogs >
Martin Engineering >
Martin® QC1? Cleaner HD Max

Martin® QC1? Cleaner HD Max
2Pages

Catalog excerpts

TECHNICAL DATA SHEET Martin® QC1™ Cleaner HD Max The Martin® QC1™ Cleaner HD Max tackles the tough jobs. Designed for rugged conditions, this sturdy cleaner features a onepin blade change, making replacement of a worn blade a simple procedure. The Martin® QC1™ Cleaner HD Max includes a Spring Tensioner to maintain proper cleaning pressure while minimizing the need for adjustment. Dual tensioners are supplied with cleaners for belts 48 in. (1219 mm) wide or wider. BENEFITS NOMENCLATURE 38926D XX XX XX XX X P/N 5-Digit Prefix Belt Width (inches) Slits/Segments Blade Width (inches) Urethane Color Tensioner SLITS/SEGMENTS 11 for no slits or segments 01 for slits only URETHANE COLOR BR for Brown NB for Navy Blue Blank for Orange 10 for segments only 00 for slits & segments GR for Green CL for Tan TENSIONER T for Martin® Spring Tensioner HD Max Matched Tensioner Maintains Consistent Cleaning Martin® QC1™ Cleaner HD Max and Spring Tensioner are system-engineered to preserve the cleaning edge from high belt speeds and multiple splices. Curved Blade Provides Consistent Cleaning Patented “CARP” (Constant Angle Radial Pressure) design maintains cleaning performance through all stages of blade life. Rugged Construction Suits Tough Conditions Mainframe of rugged 3/8-in. (9.5-mm) thick DOM steel tubing has steel bar backbone. Aluminum extrusion in blade base holds cleaner snugly to backbone. P/N 5-Digit Prefix Belt Width (inches) Slits/Segments Blade Width (inches) Urethane Color Tensioner Fast Blade Change Cuts Service Expense One-pin blade replacement makes blade replacement a fast and easy operation. Blade Materials Match Application Martin Engineering’s urethane expertise provides blades to suit standard, high-temperature, or high-abrasion conditions. The Most Cleaner, the Least Investment Economical pre-cleaner and tensioner system combines effective cleaning, durable life, and low-maintenance requirements. NOTES Martin® QC1™ Cleaners are available for belts up to 120 in. (3048 mm) wide. For belts wider than 72 in. (2000 mm) a dualblade assembly is required. Normal blade length is belt width less 6 in. (150 mm). For belts with a 45° trough or where material is centered on belt, customer should consider a blade that is belt width less 12 in. (300 mm). This is because belt edges may not require cleaning, and blade-to-belt friction in these areas may lead to premature wear of cleaner and/or belt. Form No. L3885-08/12 © Martin Engineering Company 2012

Open the catalog to page 1

TECHNICAL DATA SHEET INSTALLATION AND MOUNTING Head Pulley Diameter (includes belt and lagging) 4.75 in. Horizontal Center Line TENSIONER OPTIONS Tensioner Blade Width Martin® Spring Tensioner HD Max Martin Spring Tensioner HD Max Dual Martin® Air Tensioner XHD Dual FREQUENTLY ASKED QUESTIONS My Pre-Cleaner keeps flipping through. What is wrong? The mounting location may be too far away from the belt. Relocate to the proper mounting location. Replace the mainframe or end weldments if they are bent. Check set screws to determine if they are tight. Retighten if necessary. ACCESSORIES PART...

Open the catalog to page 2

Martin® QC1? Cleaner HD Max 2Pages

Catalog excerpts

All Martin Engineering catalogs and technical brochures

Martin® QC1? Cleaner HD Max
2Pages