VALVES CONTROLS ACCESSORIES Take a Good Look It May Be Your Future

DO YOU STILL USE CONVENTIONAL ACTUATOR MOUNTING ? Conventional mounting method is to use a bracket and adapter between ball valve and actuator, however, the bracket and adapter can often be the source of failure for valve / actuator packages: A simple misalignment of the bracket and adapter can cause excessive wear and high torque than expected, this can result in stem leakage or valve stall. A warped bracket, however slightly, or the bolt drillings lose center, stem side loading can occur. If the adapter is too long and bracket bolts are drawn down tightly, the adapter can jam the valve stem...

Mars Direct Mount Ball Valve Sets A New Standard For Ball Valve / Actuator Mounting, Enhances Functional Performance With Easy Installation And Lower Maintenance Cost. The new way of mounting actuator is the Direct Mount Configuration, it is designed to overcome the problems of conventional actuator mounting.This design allows an actuator bolted directly to the top of ball valves for greater reliability, easy installation and improved cycling life. No bracket and adapter are required, the valve stem is an integral part of the actuator drive. The direct valve stem coupling to actuator shaft ensures...

Patented Direct Mount Ball Valves can be easily, best of all, mated to MARS DIRECT MOUNT Mars pneumatic and electric actuators with no brackets and couplings to produce total final control elements, and in combination with our Maintenance BALL VALVES MAKING the Free, Triple Sealing, High Cycle Stem Packing System, Mars Direct Mount OTHERS FOLLOWERS Ball Valve is your best choice for automation service. Mars Valve Not Only Offers You Cost Effective High Quality Ball Valves But Also Offers You A Successful Future

MARS UNIQUE SEALMAX® STEM DESIGN - MAINTENANCE FREE - TRIPLE SEALING SYSTEM - LIVE LOADED STEM PACKING - EXTREMELY HIGHT CYCLE - PROVIDES OPTIMUM STEM SEALS 5. 1. PYRAMIDAL STEM WITH STEM SEAL First stage of defense against leakage. The 45 degree slope of the stem accompany the stem seal effectively blocks all leak path during rotation. 2. O-RING STEM PACKING Second stage of defense against leakage, enhances stem seal and maintains stem alignment, provides extra longer service life. 3. V-RING STEM PACKING Third stage of defense against leakage. multiple layers of V-Ring Chevron Packing expands...

Mars Series 83, Series 88, Series 90, Series 90D, and Series 91D have been awarded Fire-Safe Certificates by SwRl(Southwest Research Institute, TX, USA) and TUV Germany. The API 607 6th Edition is the latest, most severe test, reflecting the conditions of a fire in the field. Passed this test gives us and pur customers a tremendous advantage in the Oil and Gas, Refining and Chemical Industries. HIGH PERFORMANCE THREE-PIECE BALL VALVE • Direct Mount • Fire Safe Certified • Full & Reduced Port Body: CF8M/WCB Ball: 316 S/S / CF8M Stem: SS316 / 17-4 PH Seats: R-TFE • Fire Safe Certified • Full &...

HIGH PERFORMANCE TWO-PIECE BALL VALVES Direct Mount Design Full Port Size: 1/4" - 3" Rating: 1000 PSI max Body: CF8M / WCB Ball: 316 S.S. / CF8M Stem: 316 S.S. Seats: R-TFE Ends: NPT, BSP, BSPT ISO 5211 MOUNTING PAD Full Port Size: 1/4" - 3" Rating: 1000 PSI max Body: CF8M / WCB Ball: 316 S.S. / CF8M Stem: 316 S.S. Seats: R-TFE Ends: NPT, BSP, BSPT Direct Mount Design 1/4"-1 1/2" Full Port 2" Reduced Port Size: 1/4" - 2" Rating: 3000 PSI Body: CF8M / WCB Ball / Stem: 316 S.S. Seats: Delrin / PEEK / Nylon Ends: Female / Female, Male / Female NPT, BSP, BSPT Seal Welded API 607 5th Edition-CF8M...

Reduced Port Body: CF8M Ball / Stem: 316 S/S Seats: PTFE Ends: NPT, BSP, BSPT Reduced Port Body: CF8M Ball / Stem: 316 S/S Seats: PTFE Ends: NPT, BSP, BSPT Reduced Port Body: CF8M Ball / Stem: 316 S/S Seats: PTFE Ends: NPT, BSP, BSPT Mini-Ball Valve Size: 1/8" - 1/2" Reduced Port Body: CF8M Ball / Stem: 316 S/S Seats: PTFE Ends: NPT, BSP, BSPT FIG 10-40 Mini-Ball Valve Size: 1/8" - 1/2" Reduced Port Body: CF8M Ball / Stem: 316 S/S Seats: PTFE Ends: NPT, BSP, BSPT

NON RETURN THREE-PIECE BALL CHECK VALVES Designed for handling steam and aggressive media One valve insteads of an isolation valve and a non-return valve for most steam and process applications, space saving, light weight and low cost of installation Size: 1/4" - 4" Pressure rating: 1000 PSI Body material: ASTM A351 CF8M Seat material: Carbon filled PTFE, 50/50 S.S. filled PTFE End options: Threaded, Socket Weld, Butt Weld, Tube (OD) Butt Weld, Flanged SAMPLING VALVE Sample process media quickly and easily with Mars Sampling Valve. ● Special cylindrical pad design to be welded flush with the...

MARS HIGH PERFORMANCE FLANGED BALL VALVES SERIES 90 ANSI CLASS 150, PN16/40 Fire Safe Tested to API 607 4th & 6th Edition Size: 1/2" - 4" Full Port Body : CF8M/WCB, 1.4408/1.0619 Ball : CF8M / 1.4408 Stem : 316 S.S. / 17-4 PH Seats: PTFE, RTFE, TFM1600 Face to Face: ANSI B16.10 EN 558-1, GR.1/GR.27 (DIN 3202-F1, F4/F5) ● NACE MR - 0175 On Request Direct Mount Design Fire Safe Tested to API 607 4th & 6th Edition Size: 1/2" - 12" Full Port Body: CF8M / WCB, 1.4408 / 1.0619 Ball : CF8M / 1.4408 Stem : 316 S.S. / 17-4 PH Seats: PTFE, RTFE, TFM1600 Face to Face: ANSI B16.10 EN 558-1,GR.1/GR.27 (DIN...

MARS HIGH PERFORMANCE FLANGED BALL VALVES SERIES 91D ANSI CLASS 150, 300 Direct Mount Design Fire Safe Tested to API 607 4th & 6th Edition Size: 1/2" - 6" Reduced Port Body: CF8M / WCB Ball: 316 S.S. / CF8M Stem: 316 S.S. / 17-4 PH Seats: PTFE, RTFE, TFM1600 Face to Face: ANSI B16.10 ● NACE MR - 0175 On Request SERIES 99 WAFER TYPE COMPACT BALL VALVE PN 16/40, ANSI CLASS 150 Direct Mount Design Fire Safe Design in Compliance with API 607 Size: 1/2" - 6" Full Port Body: CF8M / WCB, 1.4408 / 1.0619 Ball : CF8M / 1.4408 Stem : 316 S.S./17-4 PH Seats: PTFE, RTFE, TFM1600 ● NACE MR - 0175 On Request...