snakeway
10Pages

FLOOR SNAKEWAY The Floor SnakeWay system is adaptability. It is the only flexible steel designed for installation below raised cable support system that bends by floors or as risers on vertical surfaces. hand in any direction without the need Mounting rings are pre-formed into for cutting, clamping or assembling of the support legs maintaining the cable any sort. It can be used in suspended, away from the floor and eliminating wall or floor applications and SnakeWay products are really cost- brackets simply fasten direct to the • hand bendable design • pre-formed mounting rings in all SnakeWay support system • no cutting or sharp edges • single universal connector bolt • open architecture that permits cable to enter or exit at any point • no special tools required • trays are easily formed to bridge obstacles • up to 85% savings in installation time • slow bends meet EIA/TIA specification • trays are UL and C-UL listed START Snake Tray“, Snake Canyon“, Wall Snake‘ and Ladder Snake‘ products are covered by one or more of the following patents: #6,637,704, #6,637,165, #6,463,704, #6,460,812, #6,449,912, #6,361,000, #6,347,493, #6,019,323, #5,953,870, #5,839,702 and AUS #737,813. Other US and Foreign Patents Pending.

…IS GOING THE BEST WAY! WALL SNAKEWAY The Wall SnakeWay enables it to UNDERFLOOR SNAKEWAY be directly attached to a wall The Underfloor SnakeWay is a modular via the mounting rings that run cable support system. It integrates along the back of the spine. structural elements of a raised access Utilising these rings eliminates floor with a high capacity cable support to create one, easy-to-install element. HANGING SNAKEWAY For use in overhead applications, the Hanging SnakeWay is hung from a single threaded rod into a mounting ring in the centre of the SnakeWay. This allows the cable to be...

SNAKEWAY CABLE SUPPORT Clamps direct to structure Hanging Double SnakeWay Wall SnakeWay direct to wall Pedestal Bracket

SYSTEM Single Hanging Wall Bracket Double Wall Bracket Pedestal SnakeWay Floor SnakeWay

SNAKEWAY CABLE SUPPORT SYSTEM SNAKEWAY CABLE SUPPORT SYSTEM continued FLOOR SNAKEWAY For installation below raised floors or vertical risers. • Pre-formed support legs. • Fasten direct to surface no brackets required. • Hand bendable no cutting. • No sharp edges. • Single connector. Floor SnakeWay Prod Code SW1101 SW1102 SW1103 SW1104 Quick Connector Pack 10 WALL SNAKEWAY Enables direct fastening to the wall via the built-in mounting rings • Mounting ring every 100mm along the spine. • No mounting brackets required. • Simple hand bending. • No cutting or sharp edges. • Fast installation....

HANGING SNAKEWAY – SINGLE Hanging SnakeWay – Single SnakeWay Connector Beam Clamp Prod Code SW2202 Cable Drop Size 10mm Hanging/Wall Adaptor Prod Code SW2223 Quick Connector Pack 10 Pedastal Bracket Pack 1 Ceiling Spacer Wall Mount Bracket Pack 1 With built in mounting rings the SnakeWay can be hung from a single threaded rod or clamped direct to the roofing structures. • No trapeze bracket required. • Simple hand bending. • No cutting or sharp edges. • Cables are just placed in the SnakeWay, no threading between supports. SNAKEWAY CABLE SUPPORT SYSTEM SNAKEWAY CABLE SUPPORT SYSTEM continued

SNAKEWAY CABLE SUPPORT SYSTEM SNAKEWAY CABLE SUPPORT SYSTEM continued HANGING SNAKEWAY – DOUBLE With built in mounting rings the SnakeWay can be hung from a single threaded rod or clamped direct to the roofing structures. • No trapeze bracket required. • Simple hand bending. • No cutting or sharp edges. • Double SnakeWay provides segregation. • Cables are just placed in the SnakeWay, no threading between supports. Hanging SnakeWay – Double SnakeWay Connector Beam Clamp Prod Code SW2202 Cable Drop Pack 1 Ceiling Spacer Prod Code SW2205 Quick Connector Pack 10 Wall Mount Bracket Pack 10 Prod...

UNDERFLOOR SNAKEWAY Pedestal SnakeWay Camloc SnakeWay Universal Divider Prod Code Size Pack SW5103 150 x 570 x 600mm 1 For use with Stringers. Integrates the structural elements of the raised floor with a high capacity cable SnakeWay. • Modular design. • No site fabrication. • Two designs cover all floor types. • Cable path is brought to an ergonomic level for safe easy access. • Creates an independent layer separate from other services. Pedestal Tee Prod Code SW5233 Pedestal Snakeway Underfloor SnakeWay installation SNAKEWAY CABLE SUPPORT SYSTEM SNAKEWAY CABLE SUPPORT SYSTEM continued

Used to attach single hanging SnakeWay to walls and other vertical surfaces. MT flexible SnakeWay is manufactured from ASTM A510 high strength steel wire to form a unique, completely hand bendable cable management system. Welding preformed steel hoops to a central spine every 100mm produces SnakeWay, allowing for its unique hand bendable design, while providing easy entry and exit for cables at any point along the length of the snakeway. The SnakeWays are constructed from pregalvanised wire in accordance with ASTM A641-89 to produce a resilient finish, which withstands indoor applications,...

DOUBLE HANGING INTERSECTION – SW3221 UNDERFLOOR SNAKEWAY CAMLOC UNIVERSAL INTERSECTION Installed as either a tee or four way crossing intersection component for the double hanging SnakeWay. Can be used on any stringer type that utilises open buttom box type design. The spring tensioned cam is inserted inside the stringer throughout the bottom slot and tightened with an allen key. The tightened cam creates a mechanical connection between the Underfloor SnakeWay basket and raised floor stringer. Install small underfloor intersection where four way intersections are necessary. No additional...