Underfloor to desk solutions In-screed flooring systems I 101 IN-SCREED FLOORING SYSTEMS A range of floor outlet boxes, fittings and plates in galvanised steel, with choice of PVC-U or steel ducting designed to be positioned within screed flooring. Product information • 3 and 4 compartments (boxes come with extra divider to make 4 compartments) • Suitable for 65-85mm screed depth • Boxes for deeper floor screed available on request • Lid recess to suit up to 6mm carpet tile • For advice on box tray lids for non-standard floor finishes please contact our Technical Team • Adjustable for box trim height • Grey moulded carpet trim for floor outlet boxes • Steel trims with various finishes available • Universal junction box with integral, fully-reversible cable segregation Standard floor box trim GY: Grey RAL7011 (floor box trim) Other trim finishes: Floor boxes can be provided with a variety of trim finishes such as brass, stainless steel and painted colours. For further information please contact the Technical Team on +44 (0)1424 856688. Floor materials 3 and 4 compartment floor outlet box Marshall-Tufflex can supply floor outlet boxes and junction boxes that are suitable for different floor materials, such as marble, stone or wood, or where a higher IP rating is required. For more information on these, please contact our Technical Team on +44 (0)1424 856688. Basic components Floor outlet box 3 & 4 Comp. including lid code size pack Universal junction box (excluding adaptors) code size pack code size pack 3 Compartment steel duct code description pack USFT25 225 x 25mm 1 x 2.5m Please see page 106 for the full range of accessory plates UNDERFLOOR TO DESK SOLUTIONS Coupler code pack code description pack Steel screeding plate code pack Note: Used in place of box lid when screeding. Minimum order quantities apply Floor box lid assembly code description pack Email [email protected] www.marshall-tufflex.com

Underfloor to desk solutions 13Amp 2 gang DP/TE switched socket code description pack UP651 3 comp 1 13Amp 2 gang DP/TE switched socket clean earth code description pack Single plate 13Amp 2x2 gang DP/TE switched socket code description pack 13Amp 2 gang DP/RCD switched socket code description pack UP660 3 comp Std 1 Not suitable for use with in-screed system. Plate dimensions Plate to accept 2 x 1 gang accessory (M3.5 x 60.3mm) code description pack Plate to accept 1 x 2 gang accessory (M3.5x120.3mm) code description pack 3 compartment = 185 x 95mm 4 compartment = 185 x 71mm Plate material Plates...