Catalogs >
Marsh Bellofram >
P39 Standard Gas Regulators

P39 Standard Gas Regulators
4Pages

Catalog excerpts

• Spare valve disks provided. Each unit comes with a 4 seat valve disk block. This block can be easily rotated 90˚ to provide a fresh valve disk sealing surface. • Easily changed from tamper-resistant to T-handle adjustment or vice versa. • Both adjustment assemblies are supplied with every unit. • Brass casing material The BelGAS P39 regulator selection is the largest of its type in the industry. We offer this regulator in three different materials, one of which will ideally suit your application AND your budget. ALL of the P39’s are offered with six different spring ranges. Our broad selection of outlet pressure spring ranges allows more precise regulation of downstream pressure, hence, better process control. Piping designs can be simplified by using any one (or all) of the 3 outlet ports that come standard on the regulator. The BelGAS P39 is the ONLY regulator of this type, which has 3 outlet ports. To enhance the versatility of this regulator further, we provide you with a choice of seat materials that allows the designer to custom fit the seat material with the application. Applications • First cut of high-pressure natural gas to control valve supply • Natural gas instrumentation columns • First cuts to any downstream, low flow application, such as catalytic heaters, valve actuators, pressure controllers and chemical injection pumps Inlet Outlet Vent Max Inlet Orifice Size 1/4 NPT 1/4 NPT (3 Ports) 4 holes (5/32" each) (STD) 1⁄4 NPT (Tapped Vent Option) 6000 PSIG, 414 BAR 5/64" Cv=0.10 Outlet Ranges 0 – 30 PSIG 2.1 BAR 0 – 60 PSIG 4.1 BAR 0 – 120 PSIG 8.3 BAR 0 – 150 PSIG 10.3 BAR 0 – 225 PSIG 15.5 BAR Temp. Range –40˚F to 225˚F –46˚C to 106˚C Weight Approximate Standard 3-1⁄4 lbs 1.46 kg Flow Charts Pressure Out PSIG BAR 140 9.7 P39 High Pressure Supply Pressure 250 PSIG P39 High Pressure Supply Pressure 2000 PSIG

Open the catalog to page 1

P39 Standard Part Matrix P03902 0 Spring Range 0-30 PSIG Version Standard Brass Unit Adjustment Method Body, Bonnet, Bottom Plug Tamper Resistant Cover T-Bar and Adjustment Screw (Allen Head) with Tamper Resistant Cover Seals Valve Spring Range Spring Spring Steel, Chrome Silicon Seat Material Standard Untapped Bonnet Vent Seat Material Nylon Teflon Standard Casing Material P39 Standard Dimensions Dimensions Table Ports Standard

Open the catalog to page 2

P39 Special Build Gas Regulators Specials include these models: – – – – – 500 PSI Outlet Dual Inlet Ports Nickel Plated and Stainless Steel Tapped Vent Models (Standard on all Stainless Steel units) Stainless Steel Version complies with NACE MR0175 P39 Special Build Part Matrix First cut of high-pressure natural gas to control valve supply Natural gas instrumentation columns First cuts to any downstream, low flow application, such as catalytic heaters, valve actuators, pressure controllers and chemical injection pumps P03902 Spring Range 0-30 PSIG Brass Unit Body, Bonnet, Bottom Plug Tamper...

Open the catalog to page 3

Specifications Inlet Outlet Vent Max Inlet Orifice Size Outlet Ranges 1/4 NPT 1/4 NPT (3 Ports) 4 holes (5/32" each) (STD) 1⁄4 NPT (Tapped Vent Option) 6000 PSIG, 414 BAR 5/64" Dual Inlet P39 Special Build Gas Dimensions Dimensions Table P39 w/Allen Head 0-500 PSIG range P39 w/T-Handle 0-500 PSIG range

Open the catalog to page 4