Catalogs >
Marsh Bellofram >
P212 Pressure Regulator

P212 Pressure Regulator
16Pages

Catalog excerpts

• Minimize Sudden Downstream Load Change • Wide Pressure Ranges • Full Relief Valve The BelGAS P212 gas pressure regulator is a direct operating, spring loaded adjustable regulator, used in applications where pressure reduction is required. The P212 is built on the reliable and time proven P202 platform and has been enhanced to offer a full relieving regulator through the diaphragm relief device. When used with a 2.5" bonnet vent port, the P212 becomes a fully relieving pressure regulator. Available in pressure ranges from 2" of water column up to 5 PSIG, making them ideal for use in applications where wide variations in pressure reduction are also required. The BelGAS Type P212 is offered with choice of ductile cast iron or WCB steel body, flanged or threaded. Applications • Compressors • Gas Engines • Service Regulators Materials of Construction P212 Series Maximum Inlet Pressure

Open the catalog to page 1

Configuration Normal High Spring Range - WC or PSI / mBAR P212 Dimensions Body Size H Version Only 1 - 2 PSIG 1.5 - 3.25 PSIG 2 - 5 PSIG Special Construction None 150 RF (2" Steel Only) 125 FF (2" Iron Only) P212 Standard P212 Flanged belgas.net Port Orientation Up (Standard) Down Right Left Bonnet Orientation 12 O'Clock 3 O'Clock (Standard) 6 O'Clock 9 O'Clock Body Material Iron Steel

Open the catalog to page 2

P212 Head Only P212 Configuration Normal High Spring Range - WC or PSIG / mBAR 2 - 5 PSIG Special Construction None 12 O'Clock 3 O'Clock (Standard) A DIVISION OF MARSH BELLOFRAM A DIVISION OF MARSH BELLOFRAM PART NUMBER PART NUMBER 2. MAX OPERATING OUTLET PRESSURE 2. MAX OPERATING OUTLET PRESSURE 2. MAX OPERATING OUTLET PRESSURE 3. MAX EMERGENCY OUTLET (CASING) PRESSURE 3. MAX EMERGENCY OUTLET (CASING) PRESSURE 3. MAX EMERGENCY OUTLET (CASING) PRESSURE 4. OUTLET PRESSURE MORE THAN 4. OUTLET PRESSURE MORE THAN 4. OUTLET PRESSURE MORE THAN 4. OUTLET PRESSURE MORE THAN SETPOINT MAY DAMAGE...

Open the catalog to page 3

P212 Normal (L) Relief Capacities P212 RELIEF DATA, 1-2 PSIG SPRING @ 2 PSIG, LEVER DISCONNECTED 1/4" Orifice Outlet Pressure (PSIG) P212 High (H) Relief Capacities P212 RELIEF DATA, 5-9 " WC SPRING @ 7 " WC, LEVER DISCONNECTED 1/4" Orifice Outlet Pressure (PSIG)

Open the catalog to page 4

P212 Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas Outlet Pressure, Spring Part Number, and Accuracy 4 inches w.c. (10 mbar) 655-697-002 or 655-697-003 1 inch w.c. (2 mbar) droop 2 inches w.c. (5 mbar) boost Inlet Pressure Orifice Size, Inches (mm) 1 inch w.c. (2 mbar) droop 2 inches w.c. (5 mbar) boost 20 inches w.c. (50 mbar) 655-697-006 ± 3 inches w.c. (7 mbar) 1. Limited due to boost - Shaded areas show where indicated droop would be exceeded regardless of capacity. - Shaded areas show where maximum operating inlet pressure for a given port diameter is exceeded. 112

Open the catalog to page 5

P212 Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas Outlet Pressure, Spring Part Number, and Accuracy Inlet Pressure NPT 2 (DN 50) Body Size Orifice Size, Inches (mm) 4 inches w.c. (10 mbar) 655-697-002 or 655-697-003 1 inch w.c. (2 mbar) droop 2 inches w.c. (5 mbar) boost 1 inch w.c. (2 mbar) droop 2 inches w.c. (5 mbar) boost 11 inches w.c. (17 mbar) 655-697-005 ± 2 inches w.c. (5 mbar) 14 inches w.c. (35 mbar) 655-697-005 ± 2 inches w.c. (5 mbar) 20 inches w.c. (50 mbar) 655-697-006 ± 3 inches w.c. (7 mbar)

Open the catalog to page 6

P212 Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas

Open the catalog to page 7

P212 Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas - Shaded areas show where maximum operating inlet pressure for a given port diameter is exceeded

Open the catalog to page 8

P212H Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas

Open the catalog to page 9

P212H Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas

Open the catalog to page 10

P212H Flow Capacities in SCFH (Nm3/h) of 0.6 Specific Gravity Natural Gas - Shaded areas show where maximum operating inlet pressure for a given port diameter is exceeded.

Open the catalog to page 11