16 P50 & P50 NACE FILTER REGULATORS 16 P50 & P50 NACE FILTER REGULATORS • Superior regulation characteristics • Self-relieving • Rugged, corrosion-resistant construction • Standard tapped vent • Excellent stability and repeatability • Soft relief seat on P50 • Integral, 40 micron, self cleaning filter • Economical • Several mounting options The BelGAS General Purpose P50 & P50 NACE Filter Regulators are reliable precision units designed for instrumentation and general purpose use in both standard environments (P50), and corrosive environments (P50 NACE). The P50 NACE complies with NACE material requirement MR0175 for sulfide stress cracking resistant metallic material for oil field equipment. Test data for these regulators show excellent performance characteristics compared with those of similar units presently on the market. These BelGAS regulators are generally superior in regulated pressure vs. flow, forward-to-reverse flow offset, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, the regulators have housings of diecast aluminum. The P50 Regulator is finished with vinyl paint (which resists scratching, weathering & other physical abuse), while the P50 NACE is finished with epoxy paint and includes a vent cap for added protection. Both models are pressure and leak tested prior to shipment from the factory. The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The P50 regulators include a unique self-cleaning 40 micron nylon mesh filter (316 stainless steel in the P50 NACE) that can be easily removed. APPLICATIONS The design of these regulators is especially well suited to pilot-operated level, pressure and flow controllers and instruments, as well as applications such as air chucks, air spray guns, air cylinders and actuators, and a wide range of industrial pneumatic systems and equipment. The P50 NACE is available for use in corrosive environments. This complies with NACE material requirement MR0175 for sulfide stress cracking resistant metallic material for oil field equipment. OUTPUT RANGE 0-10 PSIG * 010 0-35 PSIG 035 0-60 PSIG 060 0-120 PSIG 120 * Not available in NACE VERSIONS Standard 0 NACE N P 0 5 0 0 2 0 0 0 P50 PART MATRIX NON RELIEVING: Used in applications where it is desirable to relieve pressure downstream of the regulator, for some constant flow applications, and where the gas flowing through the regulator must not escape at the regulator. Non-relieving regulators should not be used for low or no flow applications. 5 MICRON FILTER: Replaces the 40 micron filter supplied with the standard Type P50 for more complete air filtration. The standard P50 will have a tapped vent, vinyl paint, 40 micron filter and low bleed. The standard P50N will have a tapped vent, epoxy paint, 40 micron filter and standard bleed. OPTIONS Standard 00 Non-relieving 0B 5 Micron Filter 0F Knob * OK Non-relieving & 5 M Filter BF Non-relieving & Knob* BK 5 M Filter & Knob* FK Non-relieving, 5 M Filter CD & Knob* * P50 standard version only

P50 & P50 NACE FILTER REGULATORS 17 PSIG BAR 90 6.2 80 5.5 70 4.8 60 4.1 50 3.4 40 2.8 30 2.1 20 1.4 10 0.7 0 0 SCFM 0 5 10 15 20 25 LPM 0 142 283 425 566 708 AIR FLOW P50: REGULATED PRESSURE VS. FLOW PSIG BAR 70 4.8 60 4.1 50 3.4 40 2.8 30 2.1 20 1.4 10 0.7 0 0 SCFM 0 2 4 6 8 10 12 14 16 18 20 LPM 0 57 113 170 227 283 340 397 453 510 566 AIR FLOW P50 NACE: REGULATED PRESSURE VS. FLOW P50 & P50 NACE DIMENSIONS Optional Mounting Bracket 607-000-057 supply pressure 100 PSIG supply pressure 100 PSIG Flow 0-10 psig Flow 0-30 psig Flow 0-60 psig Flow 0-120 psig 0-30 psig 0-60 psig P50 FILTER REGULATOR...