Catalogs >
Marsh Bellofram >
Bellofram Silicones Product Line Card and Capabilities

Bellofram Silicones Product Line Card and Capabilities
8Pages

Catalog excerpts

Bellofram Silicones Product Line Card and Capabilities - 1

BELLOFRAM SILICONES INC. 8019 OHIO RIVER BOULEVARD | NEWELL, WEST VIRGINIA 26050 TOLL-FREE: +1.800.727.5646 | FAX: +1.304.387.1212 www.beMoframsilicones.com

Open the catalog to page 1

Bellofram Silicones Product Line Card and Capabilities - 2

Bellofram Silicones extruded closed cell silicone sponge profiles are used when difficult sealing problems require a combination of complex gasket shapes and extreme flexibility. Our full in-house die making capabilities allow us to produce cords, rectangles, tubes, and any other complex geometries. Our in-house mixing provides a choice of materials with a wide compression deflection rating, ranging from ASTM D 1056 2D1 soft density to ASTM D 1056 2D5 extra firm density, with a temperature range of -85° to 400°F for continuous use. The self-forming skin enhances the profile’s water...

Open the catalog to page 2

Bellofram Silicones Product Line Card and Capabilities - 3

Extensive expertise in custom formulations and toolmaking capabilities allow Bellofram Silicones to produce solid silicone elastomer extrusions in almost limitless shapes and hardnesses, and in diameters up to 2.500”. Our extruded rubber cords, tubes, and custom profiles may be used to make gaskets, seals, and O-rings. They may also be used as grips and handles to ensure worker safety when operating hoses and nozzles. Larger diameter rubber extrusions are popular choices as bumpers and guards for equipment protection. Bellofram Silicones also offers solid silicone rubber extruded materials...

Open the catalog to page 3

Bellofram Silicones Product Line Card and Capabilities - 4

Bellofram Silicones is one of a very small number of closed cell silicone sponge molded elastomer manufacturers. Our own in-house mixing gives you the choice of materials with a wide compression deflection rating, from ASTM D 1056 2D1 soft density to ASTM D 1056 2D5 extra firm density, with a temperature range of -85° to 400°F for continuous use. The self-forming skin enhances product resistance to water absorption and protects from contaminants. Need to meet a BMS requirement? Bellofram is a certified supplier of BMS 1-23 and BMS 1-60 molded products. We offer a flame retardant version in...

Open the catalog to page 4

Bellofram Silicones Product Line Card and Capabilities - 5

BELLOFRAM Solid Silicone Molded Products Bellofram Silicones offers solid silicone molded products, available in 30 to 80 shore “A” durometer, with a temperature range of -85° to 400°F for continuous use. Material choices range from economical commercial grade to high-performance low-temperature, flex and tear resistant specification grades. These products can be tinted to most colors. Our inhouse mixing of custom formulations also allow us to produce materials to the ASTM, SAE, MIL-STD, and other military and industrial specifications. Fully certified NSF/ANSI 51 formulations produced with...

Open the catalog to page 5

Bellofram Silicones Product Line Card and Capabilities - 6

BELLOFOAM™ from Bellofram Silicones is the lightest high-consistency closed cell silicone rubber sheeting material on the market. It contains truly closed cells, as determined by the stringent ASTM-D-1056 water absorption under vacuum method, eliminating wicking. The formulation and construction of these sheets allows for continuous operation of materials over a wide temperature range of -85° to +400°F, with outstanding recovery after compression. The sheets skived from buns can be supplied from 0.125” to 2.00” thickness, or buns can be skived into sheets using a customer’s own...

Open the catalog to page 6

Bellofram Silicones Product Line Card and Capabilities - 7

BELLOFRAM SILICONES Capabilities Gallery SOLID SILICONE Cords and Tubes CLOSED CELL SILICONE SPONGE Rectangular Extrusions Bellofram extruded solid silicone cords and tubes can be used to make gaskets, seals and O-rings. They are also used as grips and handles to ensure personnel protection on hoses and nozzles. These parts can be produced up to 2.50", and make excellent bumpers and guards for equipment protection. Our mixing and compounding capabilities allow us to produce hardness ranges from 30 to 80 shore “A” durometer, using economical commercial grade or high strength specification...

Open the catalog to page 7

Bellofram Silicones Product Line Card and Capabilities - 8

BELLOFRAM SILICONES INC. 8019 OHIO RIVER BOULEVARD | NEWELL, WEST VIRGINIA 26050 TOLL-FREE: +1.800.727.5646 | FAX: +1.304.387.1212 www.beMoframsilicones.com

Open the catalog to page 8