Catalogs >
Marsh Bellofram >
BelGAS Product Overview LT5040

BelGAS Product Overview LT5040
12Pages

Catalog excerpts

Product Overview

P627 & P630 - High Flow Regulators The P627 and P630 are spring loaded, direct-operated regulators for both low and high pressure applications in the oil and gas industries. Options/Features • P627 & P630 available as Relieving Regulators g • P627 & P630 available with Flanged End Connections End • P627 available with Socket Weld End C d Connections • P627 & P630 available as NACE Construction st truction • P627 available with LCC Threaded Bodies od dies • P627 & P630 available in Low Pressure ur re Models • P627 available with Monitor Porting • L627 has Red Bonnet - UL listed as an LP gas...

Open the catalog to page 2

The P119 Control Valve is used for on-off or throttling service of corrosive or noncorrosive gases or liquids, limited by available compatible materials. Options/Features Steel unit is NACE Compliant Tight Shut-off Positive shutoff at Maximum Working Pressures 3/4”, 1” & 1-1/4” Connection Sizes 3 to 60 PSIG in 4 Ranges Applications • On-Off or Throttling Control • Fuel Valve Heaters P95 - Pressure Reducing Regulator Rugged and durable, direct operating pressure reducing regulator for industrial, oil and gas and water / waste water applications that require severe service reliability....

Open the catalog to page 3

The P200 pressure regulator is a widely used industry standard in use at city gates as service regulators, oil and gas compression skids for natural gas engines and on large taps for industrial and large commercial gas regulation. The P200 is a very stabile, direct acting regulator where gas use varies greatly and load changes are normal practice. BelGAS has meticulously produced an industry standard regulator with the all the quality and material requirements of our BelGAS line of regulators made in the United States. Over 250,000 cycles have been applied to assure a reliable, quality...

Open the catalog to page 4

• Ports sizes available in 3/4” and 1 1/4” • Spring ranges from 3.5” water column up to 33” water column • Relieving version only • Optional Low Pressure Cut-Off version (LPCO) Iron body only • Variable orice sizes from 1/8” up to 5/8” • Options for body and vent orientation • Burner and unit heaters • Light industrial or commercial gas regulation • Natural gas or propane gas use The BelGAS P143 pressure regulator is a direct operating, pressure reducing regulator suitable for use in natural gas, propane gas, air and general purpose applications. A widely used industry standard, the P143 is...

Open the catalog to page 5

P1367 - Instrument Supply Manifold System D I V I S I O N The P1367 supply manifold offers a complete package for reducing a high pressure supply system down to a ltered, instrument level pressure supply. Options/Features • NACE Construction available • P350 Stainless Filter standard • 1/4” Connection • High Pressure Line Take Off • Instrument Supply Range 10 PSI to 60 PSI Max Operating Pressure of 4,000 PSIG 25 Micron Glass MicroFiber and Stainless Mesh 1/4” Connection Manual Drain available Applications • Used in the P1367 Supply Manifold • Instrument Supply Filter P39 - High Pressure...

Open the catalog to page 6

UL Listed NACE available (Non-UL) 60-Mesh particulate screen 250 PSIG supply / up to 30 SCFM ow 1/4” connections - 1/4” tapped vent 10 to 120 PSIG in 4 Ranges P36 - Non-Relieving Regulator UL Listed NACE available (Non-UL) 60-Mesh particulate screen 250 PSIG supply / up to 30 SCFM ow 1/4” connections - 1/4” tapped vent Selectable Ranges up to 60 PSIG UL Listed Minimal supply pressure effect 400 PSIG supply / 110 scfm; 16.5 Mbtu/hr. ow 1/2” & 3/4” connections - 1/4” tapped vent 10 to 125 PSIG in 4 Ranges P38 - Balanced Supply Valve Regulator UL Listed Minimal supply pressure effect 400 PSIG...

Open the catalog to page 7

NACE available Non-relieving option available 250 PSIG supply / up to 20 SCFM ow 5 or 40 micron self cleaning particulate lter Drip bowl with manual drain 1/4” connections - 1/4” tapped vent 10 to 120 PSIG in 4 Ranges Low Pressure - Instrumentation Regulators Conforms to NACE standard 250 PSIG supply / up to 20 SCFM ow 1/4” & 3/8” connections - 1/4” tapped vent Non-relieving option available 30 to 150 PSIG in 4 Ranges P51SSFR - Relieving Filter Regulator / Manual Drain • • • • • • Conforms to NACE standard 5 or 40 micron self cleaning particulate lter 250 PSIG supply / up to 20 SCFM ow 1/4”...

Open the catalog to page 8

T2000 - I/P or E/P Input/Signal to Pressure Transducer The T2000 Input/Signal to Pressure Transducer uses a closed-loop pressure feedback system for precision pressure output and minimal environment effects. Options/Features • High precision, 0.1% accuracy typical • Vibration and position insensitive • DIP switches permit eld selection of inputs and direct/reverse/split ranging • Very wide selection of input and output ranges • NEMA 4X (weatherproof) and intrinsically safe are standard • Explosion proof model available • 140 PSIG max pressure input Valve Actuators and Positioners Relays...

Open the catalog to page 9

P79V - Volume Pressure Booster The P79V volume pressure booster is used on control valves to speed up the operation of the valve. The P79V is standard with an adjustable bypass valve or can be ordered without the bypass valve. Also available in a high relief version or non-relieving. Options and Features • Ports sizes available in 3/8” up to 1” • Valve control volume booster • Bypass valve standard • No relief and High relief available Polycarbonate bowls 5, 25 or 50 micron particulate lter 145 PSIG supply / up to 120 SCFM ow Manual or semi-auto drains 1/8”, 1/4”, 3/8” & 1/2” connections...

Open the catalog to page 10

W Series - X-Mas Tree Gauge • Well Head Applications • 4-1/2” Dial Size • Stainless Case, Stainless Tube & Socket • Single Scale PSI Dial, Micrometer Pointer J & X Series - Severe Service GG Series - General Service • Suited for Water, Gas, Oil, Air & Non-Corrosives • 1-1/2”, 2” & 2-1/2” Dial Sizes • Steel Case, Brass Tube & Socket • Dual Scale PSI / KPA Dial H, HW & HN Series Precision Service • Severe & Rugged Service Applications • 100mm & 160mm Dial Sizes • Stainless Case, Brass or Stainless Tube & Socket • Dual & Single Scale available • NACE Compliant Gauges available L Series -...

Open the catalog to page 11