ENCLOSED SNAP-ACTION SWITCH
2Pages

DUST AND WATER PROTECTION IP 67 Suitable for harsh environment Numerous versions High level of tolerance in use High rating Slider actuation without additional lever High level of safety and reliability PRODUCT FEATURES ^ Compact design with dust and water proof switching system according to IP 67 ^ Modular principle offers a wide selection of terminals, auxiliary actuators and fastening types and cable assembly ^ Large overtravel > 1.2 mm despite small size ^ For ratings up to 48 W (resistive load) resp. 30 W lamp load (NC) ^ Optimized actuator design enables an actuating angle up to 40° Switching reliability by tension spring contact system Technical details are exemplarily and are depending on the conditions, connection and the geometry in the application. EXAMPLES OF APPLICATION ^ Automotive applications ^ Locking systems (side door-, trunk- and hood latches, rotary latches, pawls; chinching, key cylinder controls) ^ Seat applications ^ Convertible top applications etc. ^ HVAC technology ^ Industrial applications ^ Off-road vehicles ^ Leisure equipment Technical changes reserved. Dimensions are not binding. Detailed specifications available on request.

SERIES 1055 – ENCLOSED SNAP-ACTION SWITCH DUST AND WATER PROTECTION IP 67 VARIANTS The modular principle offers a wide range of terminals, actuators and fastening types. Housing variants Pins right / left / on both sides, 0.8 mm / 1.5 mm / 2.5 mm / 5 mm, stacking geometry Terminal types Different terminal types, e.g. solder terminals, PCB terminals, angled PCB terminals The switch is optionally available with pre-confectioned cables. Switch with connector available on request (also versions with IP 67) Auxiliary actuators (Examples) differential lever Switch with pre-confectioned cables...