Dual Axis Laser Micrometers for very high accuracy diameter measurement Ultra accurate, high speed Laser Gauges for contact-less diameter measurement, featuring builtin electronics and Ethernet/Rs232/Rs485 interface • • • • • • • • • • • • • Dual axis gauge Multiple measuring modes Up to 0.02 μm repeatability 1500 Hz scanning frequency Outstanding single shot repeatability Permanent self calibration Fully re-programmable Direct connection to PC, PLC e NC Motor with Fluid Dynamic Bearing Technology NO-VAR: active thermal compensation Direct connection to Internet Browser Capability to store different application programs Inputs for reading and synchronizing quadrature encoders It’s an ideal Intelligent Diameter Sensor for the on-line control of products like: • • • • • Extruded tubes and profiles Drawn metal wires Medical tubes Electric

The XY Sensor Software The XLS sensors are equipped with a pre-loaded software to perform different types of measurements and in several modes, to meet a number of applications. In general the instrument performs just as an Intelligent Sensor, transmitting the measured data to an external device, through its serial ports. The tolerance checking or other more sophisticated features are not not included, these are performed by the user’ s device or by the available Aeroel Dedicated Systems. Measurement processing Instant values: simple average over n scans, being n t 1 programmable Measured dimensions:...

Exclusive Aeroel features • The scanning motor without ball bearing works perfectly, with no wear. • The NO-VAR option allows you to automatically compensate for the expansion of the part when room temperature changes. The user only needs to program the proper coefficient of thermal expansion of the part. • The Web Server allows you to connect the sensor through the Ethernet line to any Internet browser and “see it” as a website, where you can view the measures, enable an application program may be installed, set-up and program the gauge and even display the video signal (light pulse). • In the...

Measuring Field Measurable Diameters Resolution (Selectable) Linearity (Centred Product) (6) Linearity (Full Range) Linearity (Reduced Field) (10) Repeatability (T=1s, ±2V) (11) Beam Spot Size (s,l) (16) Scanning Frequency Scanning Speed Thermal Coefficient (17) Power Supply Laser Source Dimensions (18) Weight (18) Operating Temperature Range Storage Temperature Atmosferic Humidity Altitude Protection D00105_E rev. 2,1 - 22.02.2022 - Copyright © 2007-2022 Aeroel s.r.l. - All rights reserved Notes (1) For Ø t 0.3 mm; for smaller diameters the field is proportionally reduced up to 4x4 mm for Ø...