SINGLE HORIZONTAL SCANNING SENSOR “O” – SHAPED FRAME A single O-shaped horizontal scanning sensor. Ideal for web widths of up to 5.4 meters. This ultrasonic sensor scanner is the simplest but accurate way to • measure your web materials basis weight for both wet and dry process • have patented automatic calibration • measure syncronistation between two or more scanner systems (same spot) Non contact, non destructive, non radiation Simple interface via OPC/UA interface Basis weight range : 0 – 4000 g/m² Foil Width: 250 - 5400mm Sensor spot diameter: 5mm Resolution : down to 0,01 g/m² Static Accuracy: ± 0.04 % (2σ) * Power supply typ: 220V AC Possible ATEX version: Yes CE Compliance EN 2006/42: Yes *Test conditions and specifications used available on r

web width roller width = A + 100mm frame width if A > 1000 mm = A + 1050 mm frame width if A ≤ 1000 mm = A + 970 mm B/2 + 430 mm if A > 1000 mm = B/2 + 300 mm if A ≤ 1000 mm = B/2 + 220 mm roller diameter if A > 1500 =∅ 120 roller diameter if A ≤ 1500 =∅ 80 if F= ∅120 = 420 mm if F= ∅ 80 = 380 mm For a full list of address locations, please consult the Marposs official website Edition 06/2024 - Specifications are subject to modifications ² Copyright 2024 MARPOSS S.p.A. (Italy) - All rights reserved. MARPOSS, logo and Marposs product names/signs mentioned or shown herein are registered trademarks...