SCANNING SYSTEM “C” SHAPED FRAME C-Shaped scanning system optimized for applications with spatial constraints. Its compact design renders it particularly suitable for environments where space is limited, offering versatility without compromising efficiency. This system can mount up to fivedistinct basis weight sensors, improving its capacity and the percentage of the web material measured. Non contact, non destructive, non radiation Simple interface via OPC/UA interface Basis weight range : 0 – 4000 g/m² Foil Width: 250 ÷ 600mm Sensor spot diameter: 5mm Resolution : down to 0,01 g/m² Static Accuracy: ± 0.04 % (2σ) * Power supply typ: 220V AC Possible ATEX version: Yes CE Compliance EN 2006/42: Yes *Test conditions and specifications used available on request

TECHNICAL SPECIFICATIONS Fastening via M6 slot nuts (position variable in length) Scanner Home Position Calibration Unit For a full list of address locations, please consult the Marposs official website Edition 06/2024 - Specifications are subject to modifications ² Copyright 2024 MARPOSS S.p.A. (Italy) - All rights reserved. MARPOSS, logo and Marposs product names/signs mentioned or shown herein are registered trademarks or trademarks of Marposs in the United States and other countries. The rights, if any, of third parties on trademarks or registered trademarks mentioned in the present publication...