MODULAR MEASURING SYSTEM Bench Gauges Quick Set™ is a retoolable modular system that can be assembled in three different gauging configurations: horizontal and vertical for multidimensional and geometric checking of shaft-like parts; chuck for multidimensional and geometric checking on parts that cannot be referenced horizontally with Vees or held between centers, such as bushings, bearings, pistons and cylindrical parts that are manufactured with a flange.

THE PRODUCT LINE Displacement Sensors Bore Gauges Product features Its design concept ensures high flexibility and quick retooling, using shop-floor components available off the shelf. 30 mm diameter stainless steel bars assure rigidity and exact positioning of the bench gauge elements. The bar system allows size expansion of the bench. The narrow 12 mm (0.47") width of all components allows a large number of measuring sections on a short part surface. Several measuring assemblies can be mounted on the base to carry on diameter, distance and geometric measurements. Part support options allow...

THE PRODUCT LINE Displacement Sensors Bore Gauges ASSEMBLIES FOR PART MEASURING Forks and Ring Gauges Centers solution Bench Gauges ASSEMBLIES FOR PART SUPPORT AND REFERENCE Indicators and Electronic Display Units Interface Boxes for Data Acquisition ASSEMBLY OF BASE STRUCTURE

THE PRODUCT LINE Displacement Sensors Bore Gauges ASSEMBLIES FOR PART MEASURING Forks and Ring Gauges Bench Gauges Indicators and Electronic Display Units ASSEMBLIES FOR PART SUPPORT AND REFERENCE Interface Boxes for Data Acquisition ASSEMBLIES OF BASE STRUCTURE

Application examples Displacement Sensors QUICKSET - HORIZONTAL Bore Gauges Forks and Ring Gauges Bench Gauges QUICKSET - VERTICAL Indicators and Electronic Display Units Interface Boxes for Data Acquisition

QUICK SET HORIZONTAL Displacement Sensors Assembly of base structure Bore Gauges Forks and Ring Gauges Bench with “V” Bench Gauges Bars Length Indicators and Electronic Display Units Interface Boxes for Data Acquisition Max. part length with 2 introducing axial limiters 7.87” Note: longer bars are available on request Order code SUPPORT FEET (PAIR) CLAMPING DEVICES (PAIR) Max. part length with 1 introducing axial limiter and 1 measuring axial limiter

Assemblies of base structure Displacement Sensors Bore Gauges Forks and Ring Gauges SINGLE STATION Quick Set-Vertical Bars Length Part length with static measurements 190 mm Part length with dynamic measurements Part length values are referred to bench gauges equipped with: Standard interchangeable centers (see page 13-14) for static measurements Cone center L = 100 mm, diameter 18 mm, for dynamic measurements Bench Gauges Indicators and Electronic Display Units The assembly of base structure is composed of base and bars. Centers are supplied separately (see page 12). Ref. Order code SINGLE STATION...

QUICK SET CHUCK Displacement Sensors Assembly of base structure Bore Gauges 4 Forks and Ring Gauges Bench Gauges The assembly of base structure is composed of support plate, support feet, clamping devices, bars and serrated referencing plate. Ref. Order code SUPPORT FEET CLAMPING DEVICE BARS L = 300 mm (PAIR) BARS L = 500 mm (PAIR) SERRATED REFERENCING PLATE (220 x 250 mm) CHROMED SERRATED REFERENCING PLATE (220 x 250 mm, HRC 68) SUPPORT PLATE (INCLUSIVE OF RUBBER FEET) 3 4 Indicators and Electronic Display Units Interface Boxes for Data Acquisition

Assemblies for part support and reference Displacement Sensors WITH FRONTAL “V” The frontal “V” accurately defines the measuring mechanical axis of the part. An assembly is composed of one support bracket and one frontal ''V'', and is available in two versions: ● with self-centering screw, for fast and frequent retooling ● without self-centering screw, for economical part positioning Bore Gauges Two assemblies are normally required to support the part. Forks and Ring Gauges For Horizontal and Chuck versions Support Bracket Order code Assembly with self-centering screw Assembly without self-centering...

THE PRODUCT LINE Displacement Sensors WITH CROSSED “V” The crossed “V” is used for very frequent retooling and when a large retooling range is needed. An assembly is composed of one support bracket and one crossed “V”, and is available in two versions: ● with self-centering screw, for fast and frequent retooling ● without self-centering screw, for economical part positioning Bore Gauges Two assemblies are normally required to support the part. For Horizontal and Chuck versions Forks and Ring Gauges Support Bracket Order code Order code Assembly with self-centering screw Assembly without self-centeringscrew...

THE PRODUCT LINE Displacement Sensors WITH RADIAL LIMITERS The part radial limiters ensure correct part introduction in the bench. An assembly is composed of one support bracket and one pair of radial limiters. Two versions of limiter are available: ● steel limiter ● brass limiter for parts with low hardness Bore Gauges For Horizontal and Chuck versions Support Bracket Length Order code Forks and Ring Gauges Order code STEEL RADIAL LIMITERS (PAIR) BRASS RADIAL LIMITERS (PAIR) Bench Gauges AXIAL LIMITERS The part axial limiter ensures correct part positioning in the bench. Two versions are available:...

THE PRODUCT LINE Displacement Sensors WITH ARMS FOR CENTER SUPPORTS These arms are suitable for static measurement acquisitions and accept standard, interchangeable universal and short center with cylindrical shank. An assembly is composed of the two arms. Centers must be ordered separately or provided by the customer. Bore Gauges For Vertical version Forks and Ring Gauges Order code UPPER ARM WITHOUT CENTER FOR SINGLE AND DUAL STATION, FOR STATIC MEASUREMENTS LOWER ARM WITHOUT CENTER FOR DUAL STATION, FOR STATIC MEASUREMENTS LOWER ARM WITHOUT CENTER FOR SINGLE STATION, FOR STATIC MEASUREMENTS...

THE PRODUCT LINE Displacement Sensors WITH PIVOTING CENTERS UNIT This unit is needed when the part to be measured is provided with center holes. The part is loaded between the centers and then introduced into the measuring station. It is recommended for small parts [max. part weight 3 kg and max. flywheel overall diameter 170 mm (6.69”)]. Bore Gauges An assembly is composed of one pair of pivoting supports and their connecting shaft, whose length depends on the length of the bars of the base structure assembly. The centers, their supports and the dampers must be ordered separately. For Horizontal...