QUADRALINEXY Laser system for in-line control of rolled or extruded products featuring rectangular cross section Quadraline.XY is a laser system designed to control the 2 dimensions, height (H) and width (W) of extruded or rolled products featuring rectangle-like cross section, TVDIBTnBUXJSFIBJSQJO TVQFSDPOEVDUPST NFUBMTUSBQT plastic or metal section, etc. The main functions of the system are as follows: • Measurement and display of the 2 external dimensions, height (H) and width (W) • Generation of out-of-tolerance alarms • Automatic process regulation, with 2 independent channels • Processing and printing of statistical reports • Interface with remote c

System configuration The Quadraline.XY system is based on an dual-axis laser gauge installed on-line, which measures the external dimensions of the product along 2 directions at 90°. In such a way it is possible to measure both the height and the width, provided that the measuring directions be aligned along the axes of the rectangular cross section of the product. In addition, to avoid that small and random twisting of the product around its axis may affect the gauging accuracy, a special filtering software saves and processes only the minimum values of the readings for each axis: these are...

Dimensions: see drawing Weight: 10.5 Kg for XSL35XY, 9 Kg for XLS13XY Oscillation angle: ± 5 degrees Oscillation period: adjustable from 2 to 12 seconds. One measurement is taken each half period, 1 to 6 sec. Air supply: standard compressed air, pressure 3 to 4 bar, 6/8 mm inlet tube. The Quadraline.XY Software The Quadraline.XY software is pre-loaded inside the Xactum gauge and, thanks to its modular structure (basic package + optional Regulation and Statistics) it can meet all operational requirements. Special care has been taken to ensure that the system is easy to use and simple to program...

Notes QUADRALINE.XY13 Gauge Model (mm) Measuring Field (mm) Measurable Dimensions (μm) Resolution (Selectable) (μm) Repeatability (T=1s, ±2V) (1) (μm) Linearity (Centred Product) (2) (Hz) Scanning Rate (m/s) Scanning Speed Laser Source (°C) Operating Temperature Range (μm/m°C) Thermal Coefficient (3) Dimensions (gauge only) (mm) Weight (gauge only) (kg) VLD (Visible Laser Diode); O= 650 nm (1) Specified with averages of four scans and oscillation half-period of 1s. (2) Maximum error when measuring flat surfaces, due to possible reflections on the product surfaces. The error value depends upon...