PRECISION MEASURING UNIT FOR THE SHOP FLOOR

HIGH PRECISION GAUGING IN THE PRODUCTION PROCESS 3 EV ROTOR SHAFTS 3 TRANSMISSION SHAFTS 3 CAM SHAFTS 3 CRANK SHAFTS TYPICAL MEASURING TASKS Dimensional, position, form measurements 3 Diameter 3 Length 3 Radius 3 Chamfer 3 Angle 3 Radial run-out 3 Axial run-out 3 Concentricity 3 Cylindricity 3 Coaxiality 3 Straightness 3 Roundness 3 Flatness 3 Symmetry 3 Parallelism 3 Perpendicularity 3 Cam profile 3 Stroke and index

Optoquick is the Marposs product line dedicated to precision measurement of workpieces in the manufacturing environment. Optoquick delivers a superior balance between measurement performance, speed and flexibility. It gives an unrivalled measurement performance in terms of accuracy, repeatability and stability. FAST & PRECISE For complete part quality validation in a few seconds FLEXIBLE Able to gauge multiple parts with a single system OPTICAL & CONTACT No matter what the specific measuring challenge is! EASY TO USE For efficient and fast measuring tasks INDUSTRIAL Able to operate on the shop...

HIGH PRECISION GAUGING IN THE PRODUCTION ENVIRONMENT SIMPLY FAST SUPERIOR EFFICIENCY IN OPERATIONS Leading edge core technologies with full MARPOSS design. Optoquick delivers a superior balance between measurement performance, speed and flexibility. It is the perfect solution for the manufacturing environment. It gives an unrivalled measurement performance in terms of accuracy, repeatability and stability. It has been tested and proven in the hardest environmental conditions. Should large temperature changes be encountered, dynamic temperature compensation may also be incorporated. Optoquick...

MULTI-SENSOR. READY FOR ANY MEASUREMENT CHALLENGE

OPTICAL SNAP The Optoquick system utilises noncontact optical scanning to provide rapid and accurate measurements. These may be taken in static mode or dynamic mode using part rotation. Industrial grade optical sensors and the MARPOSS digital signal processing technology make accurate and reliable measurements. Measurements that are challenging on other measurement systems such as eccentric parts, pin bearings on crankshafts or measurements at structural junctions may also be taken reliably. G65 – CONTACT GAUGE The G65 is the perfect complement for non-visible features that require inspection....

CONTACT CAM FOLLOWER The MARPOSS cam follower is the innovative solution for the complex task of measuring cam profile during high-speed rotation. It is capable of gauging all types of cam profiles including those with concave sections. CONTACT AXIAL PROBE By the intelligent integration of an axial contact probe the capabilities of the Optoquick are further enhanced. This allows the Optoquick to carry out the additional functions below: • Axial run-out with tight tolerances • Distances at user defined radii • Measurements across the center axis • Measurements outside of the optical measuring...

REAL-TIME FLEXIBILITY MAKES COST-EFFECTIVENESS PROTECTS YOUR INVESTMENT OVER TIME One single Optoquick can be used to control several machines, manufacturing different parts, in the same production area. Planning a fully flexible and reconfigurable strategy for your production? Need to adapt an existing production line to manufacture new parts or maybe just a new version of an existing part is to be produced? This is not a problem for the Optoquick Add an additional configuration file to the Optoquick. This flexibility makes Optoquick “future-proof”. Optoquick switches in real-time to a new control...

MAKES OPERATIONS MORE EFFICIENT IMPROVES YOUR LEVEL OF QUALITY IN MANUFACTURING Optoquick reduces time lost for part validation during the production cycle. Not only is Optoquick fast, but as it is installed directly alongside the production machines, eliminating costly part transportation. By using Optoquick, productivity is increased and peaks in production are managed. It is for this reason the return-on-investment is within months. Since Optoquick is alongside machine tools, part validation and verification may be on a more frequent basis. Optoquick therefore gives improved quality assurance...

SIMPLE AND FAST OPERATIONS • • • • • • Automatic measurement routines with One-click cycle activation Open loading area for comfortable operator access Optical safety barriers protection Automatic ambient temperature compensation Part temperature compensation option Embedded LED on tailstock for real-time part loading error feedback INTUITIVE MEASUREMENT VALIDATION • • • Measurement reporting is easy to understand Identification of out-of-tolerance measurements is clear via the graphic display Real part image display for simple root-cause analysis Preloaded, multi part programs for inspecting...

HEAVY-DUTY WORKPIECES • Optoquick L is the perfect choice for large workpieces. These are possible to be loaded into the Optoquick both in manual or automatic mode The tailstock is motorized, making part clamping and retooling completely automatic REAL-TIME CONFIGURATION CHANGE • The smart control interface allows line managers to completely interact with the Optoquick with a simple set of commands Optoquick supports multiple part programs so it can measure different parts subsequently through a simple command. It can switch from one to another program in a matter of seconds therefore removing...

New! Optoquick is the world-first solution in its category combining a so large number of different measurement technologies, optical and contact. The latest step of the OptoQuick evolution is the integration of a 3D laser head, extending the capability of the product to extensively measure transmission shafts with a very short cycle time. Thanks to the extended multi-sensor capability, the Optoquick positions itself as an all-in-one flexible solution, since it can deliver a premium level of measuring functionality and makes possible measurements that are not resolved by traditional measurement...