M50 MANUAL SYSTEM FOR CHECKING BRAKE DISKS, DISKS AND DRUMS NEW Marposs has integrated the inspection for dimension, geometry, and non-destructive testing into the new M50 bench system. Perfect for inter-operational and final inspection applications, the M50 is able to perform all the dimensional, geometric and optional non-destructive evaluation typical required for brake disks, drums and hub type parts. RELIABLE The M50 system is an extremely reliable and accurate instrument, designed for measuring on the shop floor. Modular mechanics combined with the E9066 amplifier unit assures the high levels of reliability and accuracy necessary in this application sector. COMPETITIVE The use of standardized components in the M50, together with its rugged designs contribute to a significant performance improvement while reducing the life cycle costs of the equipment. All these features make the M50 system exceed previous price/performance ratios while meeting the customers request for shorter deliveries.

THE M50 SYSTEM The gauge The measuring station is assembled on a precision mechanical slide and, is equipped with Marposs measuring cells (LVDTs) and mechanics necessary for tight tolerance dimensional and geometric measurements. Replacing a few simple mechanical details and repositioning the measuring assemblies permits the M50 to be reconfigured for a family of similar parts with different dimensions. The typical measurements performed on brake disks and drums are: - diameter - thickness - taper - parallelism - perpendicularity - T.I.R. The part support is typically fixed and provided with...