YUJILEDS® BC series LED datasheet YJ-BC-3030-G04Surface Mount Device Applications - High-end architectural lighting - Photographic/broadcast lighting - Human-centric lighting - Photoelectric device and relevant research - Industrial highest CRI performance - Improved luminous efficacy - Exempt Risk Group certified (IEC 62471) - SimpleBinning solution About Yujileds® Document Number: YJWJ102 Rev Version: 2.0

Document Number: YJWJ102 Rev Version: 2.0 1 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 2 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 General description Yujileds® BC series 3030 G04 LED is manufactured with the blue (typical 450nm) die, mixing with Yuji advanced phosphors for specifically designed spectral recipes. This mid-power LED provides industrial highest CRI and improves the luminous efficacy. It can be used in a variety of applications demanding high color quality and homogeneous lighting distribution. The BC series 3030 LED also supports the unique service/certification by Yujileds® as described below. TM-30-18 specification The most advanced colorimetric for color rendition,...

Document Number: YJWJ102 Rev Version: 2.0 PART NUMBER PRODUCT CODE CCT CHROMATICITY BINS VOLTAGE RANGE

Document Number: YJWJ102 Rev Version: 2.0 SYMBOL UNIT TOLERANCE Forward voltage Luminous flux Color rendering index TCS R9 (CRI red) Fidelity index3 Gamut index3 TLCI 20124 1. Yujileds® promises the chromaticity coordinate tolerance of ±0.0015 (CIE 1931 x,y) based on Yuji standard equipment shall prevail. 3. Defined by the IES TM-30-18 method, this data is for trial. 4. Defined by the EBU, TLCI is the abbreviation of Television Lighting Consistency Index, this data is for trial. 5. This data is for reference only.

Document Number: YJWJ102 Rev Version: 2.0 Characteristics Absolute maximum ratings (Ta = 25°C) PARAMETER Power Consumption DC Forward Current (pulsed)1 DC Forward Current Reverse Voltage Junction Temperature Solder Point Temperature3 Operating Temperature Storage Temperature Soldering Temperature Reflow Cycles Allowed Topr Tstg Tsol 1. Pulse width < 0.1ms, duty < 1/10. 3. See page Package material and dimension.

Document Number: YJWJ102 Rev Version: 2.0

Document Number: YJWJ102 Rev Version: 2.0 Relative luminous flux Time (hour) Time (hour) Relative luminous flux Time (hour) Time (hour) Relative luminous flux Time (hour) Data from IESNA LM-80-2008, report number R2DG160511050-10-M1. Yujileds® reserves all the right for final explanation of reliability. Time (hour) 8 / 20 This datasheet is subject to change without not

Document Number: YJWJ102 Rev Version: 2.0 Package material and dimension Package layout All dimensions in mm, tolerance unless mentioned is ±0.1mm. Package materials ITEM Lead frame material Encapsulant resin material Electrodes material Silver-plated copper 9 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 Characteristic graph Typical spectral power distribution (normalized) All characteristic curves are for reference only and not guaranteed. 10 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 Characteristic graph Forward current All characteristic curves are for reference only and not guaranteed. Vs. relative luminous flux Relative Luminous Output 11 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 All characteristic curves are for reference only and not guaranteed. Vs. relative chromaticity shift 0 002 Vs. absolute chromaticity shift Derating based on solder point Note: De-rating curves are meant for recommendation only and are not meant to provide guarantees of product stability and longevity.

Document Number: YJWJ102 Rev Version: 2.0 Characteristic graph Solder point temperature (Ts) All characteristic curves are for reference only and not guaranteed. Forward Voltage Change (V) Vs. relative chromaticity shift Vs. absolute chromaticity shift 13 / 20 This datasheet is subject to change without noti

Document Number: YJWJ102 Rev Version: 2.0 Characteristic graph Spatial distribution (TA = 25°C, IF = 300 mA) All characteristic curves are for reference only and not guaranteed. 14 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 Solder and reflow profile Recommended solder pad layout All dimensions in mm, tolerance unless mentioned is ±0.1mm. Reflow profile Soldering ramp-up time (Pb-FREE). Time (seconds) Note: Soldering paste with the melting point at 230°C is recommended. 15 / 20 This datasheet is subject to change without n

Document Number: YJWJ102 Rev Version: 2.0 SMT instruction Problems caused by improper selection of collet Choosing the right collet is important in ensuring product quality after SMT. LEDs are different from other electronic components, as they are not only concerned with electrical output but also optical output. This characteristic makes LEDs more fragile in the process of SMT. If the collet’s lowering height is not well set, it will bring damage to the gold wire at the time of collet’s pick-and-place process which can cause the LED to not illuminate, flicker or contribute to other quality...

Document Number: YJWJ102 Rev Version: 2.0 Tape and reel specifications Tape dimensions (unit: mm) Tape layout Not drawn to scale. A: Cover tape, 300mm; B: Empty leader, 200mm; C: LED, 5000pcs; D: Empty trailer, 200mm. 17 / 20 This datasheet is subject to change withou

Document Number: YJWJ102 Rev Version: 2.0 Tape and reel specifications Reel dimensions top (unit: mm) Reel dimensions side (unit: mm) Reel dimensions bottom (unit: mm) Feeding direction 18 / 20 This datasheet is subject to change without notice.

Document Number: YJWJ102 Rev Version: 2.0 Reeled products (max 5000pcs / reel) are packed in a moisture-proof bag along with a moisture desiccant pack. Each inner box contains up to 6 moisture-proof bag (total maximum number of SMDs is 30000pcs). Box package size: 250 mm × 245 mm × 75 mm. Each outer package contains 10 inner boxes. Box size: 510 mm × 430 mm × 300 mm. Outer package is sealed with protective bubble wrap and foam. (Part numbers, lot numbers, quantity should appear on the label on the moisture-proof bag, part numbers). This packaging merely intended as a reference for standard quantity...