OBSERVE PRECAUnCKS ELECTSOSTATIC SENSITIVE DEVICES PRODUCT: 5050 SURFACE MOUNT RGBWW LED 5.4 mm x 5.0 mm x1.65 mm surface-mount LED 120° emission angle YUJILEDS® RGBWW 5050 allows for high brightness with individual red, green, blue and white emission control in a PLCC-10 package. Document Number: YJWJ063 Rev Version 1.0 This datasheet is subject to change without notice. CCT range is tested under Yuji Everfine standard equipment which shall prevail, CIE1931 chromaticity coordinate tolerance ±0.0015 as reference.

ABSOLUTE MAXIMUM RATING (Ta = 25 °C) Document Number: YJWJ063 Rev Version 1.0 This datasheet is subject to change without notice. Pulse width < 0.1ms, Duty < 1/10. See page 5 for solder point definition.

YJ-BC-RGBWW-5050L-G03High CRI LED CHROMATICITY BINS & COORDINATES Document Number: YJWJ063 Rev Version 1.0 This datasheet is subject to change without notice.

TYPICAL CHROMATIC GAMUT & WHITE POINTS CIE 1931 COLOR SPACE 0.9 Document Number: YJWJ063 Rev Version 1.0 www.yujiintl.com This datasheet is subject to change without notice.

YJ-BC-RGBWW-5050L-G03 High CRI LED PACKAGE LAYOUT All dimensions in mm, tolerance unless mentioned is ±0.1mm. W1 = 2700K, W2 = 6500K RECOMMENDED SOLDER PAD LAYOUT All dimensions in mm, tolerance unless mentioned is ±0.1mm. Document Number: YJWJ063 Rev Version 1.0 www.yujiintl.com This datasheet is subject to change without notice.

YJ-BC-RGBWW-5050L-G03 High CRI LED CHARACTERISTIC CURVES ALL CHARACTERISTIC CURVES ARE FOR REFERENCE ONLY AND NOT GUARANTEED FORWARD CURRENT VS FORWARD VOLTAGE (TA = 25°C) R FORWARD CURRENT VS FORWARD VOLTAGE (TA = 25°C) FORWARD CURRENT VS DOMINANT WAVELENGTH (G) FORWARD CURRENT VS DOMINANT WAVELENGTH (R) FORWARD CURRENT VS RELATIVE LUMINOUS OUTPUT (TA = 25°C) Relative Luminous Output Relative Luminous Output FORWARD CURRENT VS RELATIVE LUMINOUS OUTPUT (TA = 25°C) Document Number: YJWJ063 Rev Version 1.0 www.yujiintl.com This datasheet is subject to change without notice

YJ-BC-RGBWW-5050L-G03 High CRI LED CHARACTERISTIC CURVES (CONTINUED) FORWARD CURRENT DERATING BASED ON SOLDER POINT FORWARD CURRENT VS DOMINANT WAVELENGTH (B) Ts [°C] NOTE: DE-RATING CURVES ARE MEANT FOR RECOMMENDATION ONLY AND ARE NOT MEANT TO PROVIDE GUARANTEES OF PRODUCT STABILITY AND LONGEVITY TYPICAL SPECTRAL DISTRIBUTION GRAPHS 6500K 2700K Relative Emission Intensity Relative Emission Intensity Document Number: YJWJ063 Rev Version 1.0 www.yujiintl.com This datasheet is subject to change without notice.

YJ-BC-RGBWW-5050L-G03 High CRI LED REFLOW PROFILE SOLDERING RAMP-UP TIME (Pb-FREE) NOTE: Soldering paste with the melting point at 230°C is recommended. INSTRUCTIONS FOR SMT Problems caused by improper selection of collet Choosing the right collet is important in ensuring product quality after SMT. LEDs are different from other electronic components, as they are not only concerned with electrical output but also optical output. This characteristic makes LEDs more fragile in the process of SMT. If the collet’s lowering height is not well set, it will bring damage to the gold wire at the time of...

YJ-BC-RGBWW-5050L-G03 High CRI LED TAPE SPECIFICATIONS TAPE DIMENSIONS (UNIT: MM) REEL SPECIFICATIONS REEL DIMENSIONS TOP (UNIT: MM) REEL DIMENSIONS SIDE (UNIT: MM) REEL DIMENSIONS BOTTOM (UNIT: MM) FEEDING DIRECTION Document Number: YJWJ063 Rev Version 1.0 www.yujiintl.com This datasheet is subject to change without notice.

1. Reeled products (max 1,000 pcs / reel) are packed in a moisture-proof bag along with a moisture desiccant pack. 2. Each inner box contains up to 5 moisture-proof bag (total maximum number of SMDs is 5,000pcs). Box package size: 250 mm x 242 mm x 75 mm. 3. Each outer package contains 10 inner boxes. Box size: 505 mm x 400 mm x 265 mm. 4. Outer package is sealed with protective bubble wrap and foam. (Part numbers, lot numbers, quantity should appear on the label on the moisture-proof bag, part numbers). 5. This packaging merely intended as a reference for standard quantity orders only - please...